Fujitsu air conditioner flashing lights: what to check and record
Why a Fujitsu light pattern depends on the model, what one Australian manual says each pattern means, and a record to fill in before you call.
Last updated
Flashing lights on a Fujitsu air conditioner can be a normal state, such as a defrost, or a fault code, and the same pattern can mean different things on different models. If the unit has stopped and its lights are flashing, treat it as a fault unless the manual for your model says the pattern is normal: count the flashes of each light, then turn it off with the remote, switch it off at its circuit breaker if that is dry and within easy reach, and call. Find the model number and the name of each light first, because the pattern only means something for that model.
How to use this guide
Step 1: Name the model and the lights
The model from the label, and each light by its name or symbol.
Go to Model and lightsStep 2: Write down the pattern
Which lights, how fast, how many flashes, and what the unit was doing.
Go to the record
Find the model and the names of the lights
The model number is on the rating label on the unit, and it looks like ASTH18KNTA for an indoor unit. Write down the indoor and the outdoor model. The names and colours of the lights vary from model to model, and on some units, such as the ASTH18KNTA, the lights carry symbols instead of words. Match each one to its name in the manual for your model.
Fujitsu General changed its trade name to GENERAL Inc. on 1 January 2026, and its Australian support site (opens in a new tab) now carries the GENERAL name. Newer manuals carry it too: the ASTH18KNTA manual has both names. So search for GENERAL as well as Fujitsu when you look for your manual.
What the lights mean on one model: the ASTH18KNTA and ASTH22KNTA
This is what the operation manual for these two models (opens in a new tab), part 9368092009-01, lists. If the booklet that came with your unit has another part number, it may be an earlier edition, so check the table against it. It shows why a light pattern means nothing until you know the model: of the seven patterns, one is a fault and the rest are states the unit is meant to be in.
| What the lights do | What it means on these models | What to do |
|---|---|---|
| Operation flashing, in heating | The unit is defrosting the outdoor unit. | Wait. It takes up to 15 minutes on these models. See the guide to frost on the outdoor unit. |
| Operation on, then two blinks, repeating | Demand response: your electricity company is limiting the unit under an arrangement you have with it. It may run with less output, or stop. | Nothing, if you have that arrangement. If you are not sure, ask your electricity company whether you have one. If you do not, call us. |
| Economy flashing 3 times, every 21 seconds or so | The filter reminder, if it has been set up. | Clean the filters as the manual describes, then clear the reminder. |
| Timer flashing | The power went off and came back, so the clock and the timer need setting again. | Set the clock and the timer again on the remote. |
| Operation and Timer flashing, and Economy flashing fast | Error code display: the unit has found a fault. | Write down the flashes, and the code if you want it (see below the table). Then turn it off with the remote, switch it off at its circuit breaker if that is dry and within easy reach, and call. |
| Operation and Timer flashing together, with Economy not flashing fast | Test run, which is for service personnel. | Press the start/stop button on the remote to end it. |
| All three flashing, with a beep, after you press a button | A function you chose on the wireless remote is not available, because a wired controller is also connected. | Nothing is wrong. Use another setting. |
The flash counts are enough for a technician. If you want the code as well, read it before you switch the unit off at the breaker, because the remote cannot read it once the power is off. On these models the remote shows the fault as a two-character code, made of numbers or letters. The manual's service check uses the recessed SERVICE CHECK button and the temperature buttons, and the unit beeps several times when the code on the remote is the one it has stored. Follow the steps on page 10 of the manual and write the code down. The remote has a second recessed button, TEST RUN, which the manual says not to press in normal use.
The same lights can mean something else on another model
The manual published for the ASTG09LVCA (opens in a new tab), an older model, gives the same three names and adds a fourth light, DEFROST. On that model a defrost shows as OPERATION flashing with the DEFROST light on. On a multi-split, its OPERATION light also flashes when indoor units are set to modes that conflict, such as one heating and another cooling: the unit switched on later stops, and its light flashes. So a flashing Operation light that means a defrost on the ASTH18KNTA can mean something else on another model. That is why we do not publish a list of Fujitsu flash codes, and why a list written for another model, or found online, can point you the wrong way.
What to do when the lights are flashing
- Look before you touch anything. Note which lights are flashing and which are steady, their colours, and whether they flash slowly or fast. Count the flashes of each light before a pause, and watch the pattern repeat. A short video helps.
- Note what the unit is doing. Is it running or stopped? Which mode was it in? Was it heating on a cold morning? Did the power go off, or did lights elsewhere in the house flicker?
- Look the pattern up in the manual for your model. If it is a state the manual describes, such as a defrost or a timer that needs setting, do what the manual says.
- If it is a fault, or you cannot match it, turn it off with the remote, then switch it off at its circuit breaker if that is dry and within easy reach. Leave it off, and call with your record.
Do not switch the power off and on to try to clear the lights. If the lights started after a power cut, the guide to air conditioner problems after a power outage has what to check.
Fujitsu light record to fill in before you call
What will a technician do?
A light pattern or a code tells us which fault the unit detected. It does not name the part that failed, so we test before we say what needs fixing. When we come out to a Fujitsu unit with its lights flashing, we usually:
- read the pattern or the code, and go through your record with you
- test the part of the system the code points to, and the power supply to the unit
- tell you what has failed, what it would take to fix, and whether that is worth doing on a unit of its age
The Australian Refrigeration Council says all servicing and repairs of a home air conditioner must be done by a technician with a full refrigeration and air conditioning licence (opens in a new tab).
How urgent is it?
A defrost, a timer that needs setting or a filter reminder is not urgent. A fault display on a unit that has stopped is a reason to leave it off and book a repair visit. If a sign from the warning at the top of this guide appears, such as a burning smell or water leaking from the unit, it is urgent: switch it off and call.
Who to call
We service Fujitsu air conditioners, and we repair and service air conditioners for homes and businesses in Bairnsdale and East Gippsland. Our air conditioning repairs page explains how to book a repair visit, and our Fujitsu servicing page covers booking a service. If the unit is still under the maker's warranty, check the warranty papers for who to contact first. Have your light record in front of you when you call.
Sources (7)
- Fujitsu: operation manual, ASTH18KNTA and ASTH22KNTA (part 9368092009-01) (opens in a new tab) Checked on 20 November 2026.
- Fujitsu: operation manual published for the ASTG09LVCA (part 9318657005-04) (opens in a new tab) Checked on 20 November 2026.
- GENERAL Thailand: what should I do when the indicator lamps on the indoor unit blink? (opens in a new tab) Checked on 20 November 2026.
- Fujitsu General: change of trade name to GENERAL Inc. (1 October 2025) (opens in a new tab) Checked on 19 November 2026.
- General Airstage Australia: support home (opens in a new tab) Checked on 20 November 2026.
- Australian Refrigeration Council, Look for the tick: home air conditioners (opens in a new tab) Checked on 20 November 2026.
- Australian Government: Triple Zero (000) (opens in a new tab) Checked on 20 November 2026.
Related pages
- Air conditioning repairs in Bairnsdale and East Gippsland
How to book a repair visit and what to have ready.
- Fujitsu air conditioner servicing in Gippsland
Booking a service for a Fujitsu system.
- Air conditioner will not turn on or respond: what to record
What to check when the unit will not start, stop or answer its remote.
Want a technician to look at it?
Call ABL or send an enquiry. Have your notes ready: the brand, the model and what the unit is doing.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
