Replacing one indoor unit on a multi split system: cost and compatibility
Before pricing one new indoor unit on a multi-split system, check what the maker supports for your outdoor unit. The options, the cost drivers and a record.
Last updated
The cost to replace one indoor unit on a multi-split system depends first on whether a compatible unit exists for your outdoor unit. A multi-split outdoor unit has a list of the indoor units it can run, a limit on how many, and a limit on their combined capacity. Record every model on the system before anyone prices the job.
How to use this guide
Step 2: Ask what fits
The maker's supported combinations for your outdoor unit.
Go to Questions to askStep 3: Compare the options
A repair, one new indoor unit, a separate system or a new multi-split.
Go to The options
Why does compatibility come before cost?
A multi-split system connects two or more indoor units to one outdoor unit. The outdoor unit compresses the refrigerant and sends it to each indoor unit, so the indoor units are parts of one system, not separate air conditioners. For each outdoor model, the maker publishes:
- the indoor units it can be matched with, by range and type
- the largest number of indoor units it can run. In current home ranges that is usually two to five
- the largest combined capacity of the indoor units connected to it
Indoor units of different types can usually be mixed on one outdoor unit: wall mounted, floor mounted, ducted or cassette. But a new indoor unit has to be one the maker supports for your outdoor model, and its capacity has to keep the total inside the limit. An indoor unit of the same brand and the right size for the room is not enough on its own.
That is why the first question is about the outdoor unit. If its maker no longer supplies a supported indoor unit for it, the price of a single unit is beside the point.
What are the options when one indoor unit has failed?
Start with what has failed. Ask the technician to name the failed part in writing, and whether the fault is in the indoor unit itself or elsewhere in the system. Then there are four ways to go:
| Option | What to check first |
|---|---|
| Repair the indoor unit | Whether the part is available for that model, and what the repair costs beside a new unit. |
| Replace it with a compatible indoor unit | That the new model is on the maker's list for your outdoor unit, that the combined capacity stays inside the limit, and that it works with your controller. |
| Fit a separate split system for that room | A place for a second outdoor unit, and a circuit for it. The failed indoor unit is taken off the multi-split by a licensed technician. |
| Replace the whole multi-split system | The age and condition of the outdoor unit, and whether the other indoor units are near the end of their life too. |
A partial replacement is not automatically the cheapest. One new indoor unit on an outdoor unit that is 10 to 15 years old may be followed by a larger bill if the outdoor unit fails. The guide to repairing or replacing an air conditioner sets out how to weigh that.
What drives the cost of replacing one indoor unit?
| What changes the cost | Why |
|---|---|
| The indoor unit itself | Its type and its capacity. A larger unit costs more. |
| The refrigerant work | Changing an indoor unit means opening the refrigerant circuit, which is work for a licensed technician. |
| The existing pipes and cables | Whether they suit the new unit and can stay, or have to be replaced through walls and ceilings. |
| Access | A unit that is hard to reach adds labour. |
| The controller | Whether the new unit works with the wall controller or app you have, or needs its own. |
| Making good | A wall or ceiling may need repair where the new unit differs from the old one. |
There is no standard price for this job, because it turns on what the maker supports for your outdoor unit. For the third option, a separate system, our general guide as at November 2026 is $2,000 to $4,000 for a basic residential split system, installed. Your quote is the price. Our split system installation page sets out what moves it up or down.
What should I ask before anyone prices the job?
Put these to the installer, and through them to the maker. Ask for the answers in writing, with model numbers.
- Which indoor models does the maker support for my outdoor model today?
- What is the combined capacity of the indoor units connected now, and what is the outdoor unit's limit?
- Will the new indoor unit work with my existing wall controller, remote or app?
- Can the existing pipes and cables to that room stay?
- What warranty applies to a new indoor unit connected to an older outdoor unit?
- How long will the other rooms be without heating and cooling while the work is done?
- What does the same job cost as a separate split system for that room?
- What condition is the outdoor unit in, and how old is it?
Two things help while you wait for answers. Under the Australian Consumer Law, a manufacturer or importer must provide spare parts and repair facilities for a reasonable time (opens in a new tab) after purchase, unless you were told when you bought it that they would not be available after a certain time. So ask about a repair before you accept that the unit is finished. And a multi-split system does not have to carry the Zoned Energy Rating Label (opens in a new tab), so ask for the maker's data sheet for any model you are offered.
Multi-split system record
Read the model numbers from the label on each unit. Your manual shows where the label is. Do not open a unit to find it. Work on the refrigerant side of a system that holds a scheduled refrigerant needs a refrigerant handling licence (opens in a new tab).
Who to call
We repair and replace air conditioners for homes and businesses in Bairnsdale and East Gippsland. For a failed indoor unit, start with a repair visit: our air conditioning repairs page explains how to book one and what to have ready. Have the record above ready when you call.
Sources (11)
Checked on 19 November 2026
- Daikin Australia: multi split air conditioning (opens in a new tab)
- Panasonic Australia: multi split air conditioning system (opens in a new tab)
- Hitachi Australia: RAM multi split systems (opens in a new tab)
- CHOICE: how to buy the best air conditioner (opens in a new tab)
- CHOICE: how much does an air conditioner cost to install or replace? (opens in a new tab)
- Daikin Australia: is it time to replace or repair your air conditioner? (opens in a new tab)
- ACCC: consumer rights and guarantees (opens in a new tab)
- Energy Rating: heating and cooling (opens in a new tab)
- Australian Refrigeration Council: frequently asked questions (opens in a new tab)
- Look for the tick: home air conditioners (opens in a new tab)
- ABL Refrigeration: air conditioning services (opens in a new tab) ABL's own page.
Related pages
- Air conditioning repairs in Bairnsdale and East Gippsland
How to book a repair visit and what to have ready.
- Repair or replace an air conditioner: how to compare the two quotes
How to weigh a repair against a new system.
- Single, multi-split or ducted: choosing a room-control layout
How a multi-split compares with separate split systems.
Want a technician to look at it?
Call ABL or send an enquiry. Have your notes ready: the brand, the model and what the unit is doing.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
