Repair or replace an onboard ice machine: comparing the two scopes
How to weigh a repair to a vessel's ice machine against an installed replacement: the diagnosis, parts, refrigerant, downtime and duty, with a sheet.
Last updated
Decide on two written scopes, not on the machine's age. Get a technician's diagnosis and a repair scope that says what failed, which parts it needs and when they arrive. Get a separate scope for an installed replacement. Then weigh parts support, the refrigerant, the time each keeps the vessel from fishing, and whether the machine still suits the fishing you do now. A repair usually wins when the fault is found and fixed with parts that are available and the machine still makes the ice you need. Replacement usually wins when parts or refrigerant are running out, faults keep coming back, or the job the machine does has changed.
How to use this guide
Step 1: Get the repair in writing
The fault found, the parts, the wait and what is still unknown.
Go to The repair scope
What should a repair scope tell you?
What the crew sees and what has failed are often different things. Low output can come from warm water, scale, a worn part or the refrigeration, and a machine that will not run can stop for a control, a motor or a safety cut-out. Where the machine can run safely, a technician checks its output against the rating, then works through the controls, the mechanical parts and the refrigeration. Give them the model and serial number, your maintenance log and what the machine was doing. A repair scope worth comparing states:
- the fault the technician found, in their words, and how they found it
- the parts, whether the maker still supplies them for this model, and how long they take to arrive
- the labour and the total, including GST
- what the repair does not cover, and other wear the technician saw that is likely to need work
- anything still unknown, such as a second fault that only shows once the first is fixed
- the warranty on the repair
Where the fault is a refrigerant leak, the scope should include finding and fixing it. A system known to be leaking must not have refrigerant added until the leaks are fixed, as the Australian Refrigeration Council (opens in a new tab) sets out, so a price for refrigerant alone is not a repair.
What tips it towards a repair or a replacement?
There is no age at which every ice machine should go, and the consumer law sets no rule for how long a product should last. These are the things we weigh, with the two scopes in front of us:
| What you know | Points to a repair | Points to a replacement |
|---|---|---|
| The fault | One fault, found and understood, with a clear fix. | Faults that keep returning, or several worn parts at once. |
| Parts | The maker still supplies them for the model and serial number, in a time you can live with. | The model is discontinued, parts are scarce, or the wait runs into the season. |
| Refrigerant | A refrigerant still in normal supply. | R22, whose imports end in 2030. |
| Condition | Scale and corrosion confined to parts that can be cleaned or replaced. | Corrosion through the frame, cabinet or condenser, or a history of heavy scale. |
| The duty | After the repair it makes the ice you need at your summer water temperature. | You need more ice, a different form, or ice from different water than it was built for. |
| Downtime | Parts on hand or close, and the work done in port between trips. | A long wait for parts, when a replacement could be planned for a quiet part of the season. |
Set what a large repair costs against an honest view of how long the rest of the machine will last. A technician who has seen it is the person to ask.
On the refrigerant: the HFC phase-down (opens in a new tab) limits imports of bulk gas, and equipment already in Australia is not affected by it. R22 (opens in a new tab) is different: as at November 2026 its imports are limited to servicing existing equipment, and from 1 January 2030 they are banned entirely, so later servicing relies on recycled refrigerant and spare parts may become harder to find. An existing R22 system in good working order does not have to be replaced. A system built for a non-flammable refrigerant must not be converted to a flammable one (opens in a new tab), and charging a system with a refrigerant of higher global warming potential than it was designed for is an offence.
Count the paperwork in the downtime. Under Marine Order 503 (opens in a new tab), replacing a refrigeration system on a vessel that holds a certificate of survey is one of the changes the order lists, and after a listed change the vessel must not operate until a new certificate of survey is issued. From 1 December 2026 the 2026 order (opens in a new tab) adds an exception, where the vessel's structural or stability design approval was based on assumptions and calculations that the change leaves valid. If there is no such approval on file for the boat, the change is listed. Ask your accredited marine surveyor early which applies to your boat.
What should the replacement scope include?
Compare the repair with the whole installed job, not the price of a machine. Some marine machines are only the ice-making section, with the condensing unit, refrigerant lines and electrical work supplied separately, and a seawater machine makes less ice than the same machine on fresh water. The guide to retrofitting an ice machine on a fishing boat: the survey pack has the vessel information an installer needs and what a complete installed quote states.
Check the model is allowed to be sold here. As at November 2026, the Greenhouse and Energy Minimum Standards (Commercial Ice-makers) Determination 2025 (opens in a new tab) covers automatic ice-makers that make up to 1,000 kg a day at its test conditions, which include a 230 V, 50 Hz supply, and it applies from 3 March 2026. A model in a covered class has to be registered before it is supplied, and its registration number shown on the product and in advertising. Whether a particular marine machine falls in a covered class depends on its size and type, so ask the supplier for its registration number or why it does not need one.
Buying a used marine ice machine: what to check first
A used machine can be good value or a second repair bill. Before you commit, get the details below from the seller, and have a refrigeration technician look at the machine and the paperwork.
| Check | Why it matters |
|---|---|
| The nameplate | Model, serial number, refrigerant, voltage, phase and frequency. The supply has to match the plate, and some machines built for overseas markets run on 60 Hz, not Australia's 50 Hz. |
| Seawater or fresh water | A machine built for fresh water is not made into a seawater machine by changing its supply. Check the maker's documents for the model. |
| Complete or part | Some marine machines are only the ice-making section. Find out whether the condensing unit, controls and fittings come with it. |
| The refrigerant | R22 and the conversion rules above apply to a used machine as much as to your own. |
| Its history | Service records, why it was removed, and how many seasons it ran on seawater. |
| Its condition | Corrosion, scale, and whether it can be seen running with its output measured. |
| Parts support | Whether the maker still supplies parts for that model and serial number. |
Who you buy from changes your rights. Under the Australian Consumer Law, the consumer guarantees (opens in a new tab) cover a product bought for a business that costs less than $100,000 including GST, and they apply to second-hand goods bought from a business. A one-off sale by a private seller, or a traditional auction, carries only three consumer guarantees: clear title, undisturbed possession and no hidden debts. If the seller is a business that does not officially offer its products in Australia, the consumer law does not cover the purchase. That is as at November 2026.
Registration does not follow a used machine in the same way. The Greenhouse and Energy Minimum Standards Act (opens in a new tab) does not apply its supply offences to second-hand products, which it defines as products already supplied in Australia before.
Questions to take to the technician
- What exactly has failed, and how did you find it?
- Are parts still made for this model and serial number, and how long will they take?
- What else did you see that is likely to need work in the next season or two?
- What refrigerant does it use, and does that limit what can be done to it?
- What does the machine make now, and what should it make at our water temperature?
- If we replace it, what would the installed job include, and what survey or notice would the change need?
- How many days would each option keep the vessel from fishing?
To keep the machine you decide to keep in good order, see the guide to the marine ice machine maintenance schedule and service log. If the fishing has changed, the guides to building an ice-demand brief for a fishing trip and to flake ice or crushed block ice for fishing help set the duty for a new one.
Repair or replace comparison sheet
Who to call
ABL repairs, services and installs ice machines on commercial fishing vessels, so you can ask us about both sides of this decision. Our marine ice machines page explains how to get in touch. Have your sheet and your maintenance log in front of you when you call.
Sources (17)
Checked on 20 November 2026
- Howe: RL ice flaker troubleshooting guide (opens in a new tab)
- Howe: installation and service manual, 2000-RL to 6000-RL, Rev. April 2019 (opens in a new tab)
- Howe: parts and support (opens in a new tab)
- Scotsman: MAR1400 and MAR2000 scale ice makers, service manual (opens in a new tab)
- JBT Marel: MAJA RVE-2S flake ice machines (opens in a new tab)
- FAO Fisheries Technical Paper 436, The use of ice on small fishing vessels (2003), chapter 2: the manufacture of ice (opens in a new tab)
- Australian Refrigeration Council: fact sheet 15, no topping up of leaking systems, July 2026 (opens in a new tab)
- Australian Refrigeration Council: fact sheet 22, the HFC phase-down, July 2026 (opens in a new tab)
- Australian Refrigeration Council: fact sheet 26, R22, July 2026 (opens in a new tab)
- Australian Refrigeration Council: fact sheet 6, alternative refrigerants, July 2026 (opens in a new tab)
- Greenhouse and Energy Minimum Standards (Commercial Ice-makers) Determination 2025 (opens in a new tab)
- Greenhouse and Energy Minimum Standards Act 2012, compilation 8, 5 December 2025 (opens in a new tab)
- Marine Order 503 (Certificates of survey, national law) 2026, made 10 November 2026, in force from 1 December 2026 (opens in a new tab)
- Marine Order 503 (Certificates of survey, national law) 2018, compilation of 1 September 2023, repealed from 1 December 2026 (opens in a new tab)
- ACCC: consumer rights and guarantees (opens in a new tab)
- Product Safety Australia: buy safe second-hand products online (opens in a new tab)
- ABL Refrigeration: marine ice machines (opens in a new tab) ABL's own page.
Related pages
- Marine ice machines
How to get in touch with ABL about a repair or a new machine.
- Retrofitting an ice machine on a fishing boat: the survey pack
What an installer needs to quote a replacement.
- Marine ice machine maintenance schedule and service log
The log that shows how the machine has been running.
Weighing a repair against a new machine?
Call ABL with your comparison sheet in front of you, or send it with an enquiry.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
