Skip to the content

Air conditioner timers for shift work: plan by day type, not by weekday

How to turn shift work and a changing household routine into air conditioner timers, with agreed limits and a worksheet to fill in together.

Last updated

Shift work breaks the usual timer advice, because the house is occupied, and someone is asleep, at different hours on different days. Plan by day type rather than by day of the week: write down who is home and who is asleep on a day shift, a night shift and a day off, choose the setting each part of the day needs, then set the timers your controller supports and agree who may change them. Have the system start shortly before someone needs the room, rather than running all day.

How to use this guide

  1. Step 1: List your day types

    Who is home, awake or asleep, on each kind of day.

    Go to Plan by day type
  2. Step 2: Match them to your timers

    One-off, sleep, weekly, wall controller or app.

    Go to Your timers
  3. Step 3: Fill in the worksheet

    The plan, the limits and who may change them.

    Go to the record

How do you plan timers around shift work?

  1. List your day types, not the days of the week. For example a day shift, a night shift and a day off. A rotating roster puts a different day type on the same weekday from one week to the next.
  2. Mark each part of the day. For each day type, write when the house is empty, when someone is home and awake, and when someone is asleep, and in which room.
  3. Give each part a setting. A sleeping room needs a quiet, steady setting. A living area needs the system on only while someone is in it. An empty house needs it off.
  4. Start a little before you need it. Start with about 15 minutes before someone comes home or goes to bed, and make it longer if the room is not comfortable when they walk in.
  5. Plan the exceptions. Public holidays, overtime, a sick day and visitors break the pattern. Decide now whether those days use a one-off timer, a manual start or no timer at all.
An example: one person in the house works a roster of day and night shifts
Day typeWho is home, and whenWhat the air conditioner does
Day shiftOut from 6 am to 6.30 pm, then home and asleep from 10 pm.Living area on at 6.15 pm, off at 10 pm. Bedroom on at 9.45 pm in sleep mode, off by timer at 2 am.
Night shiftHome and asleep from 8 am to 3 pm, out from 6 pm.Bedroom on at 7.45 am, off at 3 pm. Living area on at 3 pm, off at 6 pm.
Day offHome all day.Turned on by hand when needed, with an off timer at bedtime.

Daytime sleep is the hard part in summer: a bedroom with afternoon sun on it heats up while you sleep, and the unit has to run quietly through the hottest hours. The guide to choosing a quiet air conditioner for a bedroom covers placing a unit for sleep, daytime sleep included.

What timers does your air conditioner have?

Controllers differ in what they can hold, so check the manual for yours. These are the usual kinds:

Kinds of timer, and how each fits a changing routine
TimerWhat it doesWatch for
On or off timerTurns the unit on or off once, at a set time or after a set number of hours.On many units a one-off timer takes priority over the weekly timer while it is set. That makes it the tool for an exception day.
Sleep or night settingOn some units it eases the setting up in cooling or down in heating through the night, then switches off.What yours does: the guide to dry mode, cool mode and the other settings explains how these differ.
Weekly timer on a handheld remoteRepeats a pattern each week. A common limit is 4 settings a day and 28 a week.It suits a fixed week better than a rotating roster. On some units it sends only the times and temperatures, not the mode.
Schedule on a wall controllerCommon on ducted systems. Depending on the controller, it holds from 2 to about 8 events a day, and on some systems a timer for each zone.How many events a day it allows, and whether it stores the mode as well as the temperature.
Phone appChanges the schedule from anywhere, which suits a roster that changes week to week. Some apps let several phones control the system, through a shared login or a sub-account.It needs the home Wi-Fi left on. On some systems the app and the remote work independently and the latest command wins.

For a rotating roster, two approaches work well: change an app schedule when the new roster comes out, or keep a weekly timer for the people whose week is fixed and use one-off timers for the shift worker's room. After a power cut or the circuit breaker being off, many units cancel their timers or lose the clock, so check both. The guide to air conditioner problems after a power outage covers the rest.

What limits should a shared household agree?

A schedule falls apart when everyone changes it. Agree three things and write them on the worksheet:

  • A temperature range for each season. We suggest 24 to 26°C for cooling in summer and 18 to 20°C for heating in winter. The Australian Government's Your Home (opens in a new tab) guide gives the same winter range and puts summer a degree higher, at 25 to 27°C. It says each extra degree of heating or cooling adds about 5 to 10 per cent to the energy the system uses. Agree a range inside those figures.
  • Who sets the schedule. One person keeps the timers, and changes them when the roster or the season changes.
  • What others may change. For example: anyone may switch a room on or off and move the setting within the agreed range, and nobody edits the schedule but the person who keeps it.

Some wall controllers can lock their buttons, or limit the lowest and highest temperature anyone can choose. On some systems that is set up in the controller's settings and on others by the installer, so the manual for your model says which. Check the manual before you count on a lock on a handheld remote. On a system with an app, give access only to the people who should have it.

What changes when the season turns?

A schedule set up for summer does not change itself for winter. When you move from cooling to heating, or back:

  • Change the mode by hand. In heat or cool mode the unit stays in that mode until you change it. A weekly timer on some units sends only the times and temperatures, so set the mode before the next timed start, or use auto mode where your manual recommends it.
  • Change the temperature in each timer setting. A summer setting of 26°C left in a winter schedule will not heat the room much.
  • Turn the vane down for heating, and level or up for cooling. The guide to dry mode, cool mode and the other settings has a diagram.
  • Clean the filters as the manual for your model shows. The guide to filter care and professional servicing covers what an owner may do.
  • Check the clock, if a storm or a power cut has reset it.

On the first cold mornings, a pause before the warm air comes, and short stops while the outdoor unit melts its frost, are normal: the guide to frost on the outdoor unit in winter explains them. For the service side of getting a system ready for the season, see the guide to seasonal readiness after summer, winter or a long break.

Household timer worksheet

Household air conditioner timer plan

Fill this in together, then print it and keep it near the controller. Change it when the roster or the season changes.

Your answers stay on this open page. They are not saved or sent. Copy or print them before you leave.

The system

Controller you use most

Day types

Agreed limits

Exceptions and seasons

This worksheet is the plan, not a measure of what it costs. If you want to know what a schedule costs to run, keep that separate: the guide to air conditioner output and electricity usage has the method, and changing one thing at a time makes the result easier to read.

When the timers do not behave

If a timer will not hold, the unit starts at times nobody set, or it will not start at all, write down what happened and when, and what the controller showed. The guide to an air conditioner that will not turn on or respond covers what to check and record. We service and repair air conditioners for homes and businesses in Bairnsdale and East Gippsland: our air conditioner service page explains what a service covers, and our air conditioning page covers everything else we do.

Sources (12)

Timers not doing what you set?

Call ABL or send an enquiry, and have your timer worksheet and the model numbers ready.

Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.