Choosing a quiet air conditioner for a bedroom: a selection worksheet
How to compare air conditioner noise figures fairly, place the indoor and outdoor units for sleep, and fill in a bedroom worksheet before a quote.
Last updated
For a quiet bedroom, compare the indoor unit's noise at the fan speed you will sleep on, not its loudest figure, and put the outdoor unit where neither your bedroom nor a neighbour's will hear it. Then plan where the air goes so it does not blow on the bed. No model is the quietest in every room: the figures, the position and how you run it overnight decide it.
How to use this guide
Step 2: Fill in the worksheet
The bed, the unit, the air path, the outdoor unit and the models.
Go to the record
How do you compare air conditioner noise figures?
Noise is given in decibels, written dB(A), and a higher number is louder. As a reference, a quiet bedroom sits around 30 dB(A) and a quiet library around 40. The trouble is that makers publish several kinds of figure, and two numbers only compare if they were measured the same way.
| Figure | What it measures | Use it for |
|---|---|---|
| The label figure | The house icon on the Zoned Energy Rating Label (opens in a new tab) shows the noise at full power, with separate inside and outside figures for a split system. | Comparing two models at their loudest, and the outdoor unit near a bedroom or a neighbour. |
| Sound pressure | What you hear at a set distance, such as one metre, in set conditions. It changes with the room and the distance. | Comparing indoor units, as long as both figures use the same distance and fan speed. |
| Sound power | The noise the unit itself gives off, whatever the room. It is a different measure from sound pressure. | The outdoor unit, and the installer's check of noise at the neighbours. |
| Quiet or low fan figure | The indoor unit at its lowest fan speed or in its quiet mode. | Overnight. Read the footnote: it may apply to one mode, one fan speed or one size of the range. |
For a sense of scale, bedroom-size wall units of about 2 to 3.5 kW are commonly published at about 18 to 24 dB(A) sound pressure on their lowest fan speed, and about 38 to 46 dB(A) on their highest. Those figures are measured in a quiet test room, usually 1 metre in front of the unit, and a unit in a real bedroom usually sounds a little louder.
So compare sound power with sound power and sound pressure with sound pressure, at the same fan speed. A unit that is too big for the room makes more noise than a right-sized one: it cycles on and off, and its larger fan moves more air than the room needs. The guide to oversized air conditioning covers that.
Where should the indoor unit go in a bedroom?
Then plan the air. A wall unit sends its air out level in cooling and angles it down in heating, so mark on your plan where that air will land. Keep the pillow out of its direct path, and do not put the bed where someone lies between a cold window and the unit.
- Mark the bed, the bedhead wall, the windows and the door on a plan of the room.
- Mark the proposed unit and draw the air path from it, level for cooling and angled down for heating.
- If the air path crosses the pillow, try another wall before you choose a model.
- If the room is used mostly for heating, a floor console is worth comparing: see the guide to floor console or wall-mounted air conditioners.
Light matters in a bedroom too. Many units can dim the lights on the indoor unit, and some silence the beep from the remote. Ask to see that setting when the unit is handed over.
Where should the outdoor unit go?
The outdoor unit matters as much as the indoor one, for your bedroom and for the neighbours. Keep it away from bedroom and living room windows, yours and theirs, and away from corners and eaves that bounce the sound around.
Under Victoria's residential noise rules (opens in a new tab), as at November 2026, air conditioner noise that a neighbour can hear indoors is unreasonable during prohibited times at night and early in the morning, and the guide to choosing an outdoor AC location gives the times and covers placement in full.
Write down where the neighbours' bedrooms are and how far the outdoor unit would be from them, and ask the installer to check the noise at those windows with the model's figures before you decide. Many units have an outdoor quiet mode that slows the compressor and the outdoor fan at night. Allow for a unit getting a little louder as it ages.
Which settings help overnight?
| Setting | What it does |
|---|---|
| Low or quiet fan speed | Turns the indoor fan down, for quieter running in the room. |
| Night or sleep mode | Dims the indoor unit's lights and, on some models, lowers the outdoor unit's noise or eases the set temperature as the night goes on so the room does not get too cold or too warm. |
| Outdoor quiet mode | Slows the outdoor compressor and fan, which helps the neighbours. |
| Timers | Start the unit before bed so the room is comfortable when you lie down, and stop it later in the night. |
The names and the details differ between makers, so check the manual for the model before you buy, and ask the installer to show you how to set them.
Air conditioning for daytime sleep
If you work nights and sleep by day, the bedroom works differently. It is in use through the heat of a summer day, with the sun on the windows, so tell the installer the room is slept in by day: the size has to suit that, not only the evening.
- Note which way the bedroom windows face and when the sun reaches them. Blinds or curtains, and outside shading where you can fit it, cut the heat before the air conditioner has to.
- Use a timer to cool the room before you go to bed.
- The prohibited times do not cover the day, but a council can still find noise unreasonable if it is excessive, and neighbours are home in the day too. The outdoor unit's position matters as much as at night.
- The guide to planning AC timers around household routines covers schedules for shift work.
Bedroom selection worksheet
Fill this in with your room plan beside you. The last part is for two models you are comparing: copy the figures from the spec sheets, with how each was measured.
What changes the price?
As at November 2026, our published guide for a basic split system is $2,000 to $4,000 installed. Your quote is the price. For a bedroom, these are the things that move it:
- the model you choose, which may be a premium one made for quiet running
- the size: the right size for the room, not the biggest
- an outdoor position further from the bedrooms, which can mean a longer pipe run
- a solid barrier or fence to screen the outdoor unit, where one is needed
Ask for the outdoor noise figures to be in the quote, alongside the capacity and the efficiency. Our split system installation page explains the job, and our air conditioning page covers everything else we do. If an air conditioner you already have has become noisy, the guide to rattling and vibration noise is the place to start.
Sources (15)
- Energy Rating: understanding the Zoned Energy Rating Label (opens in a new tab) Checked on 19 November 2026.
- Daikin Australia: sound power level and sound pressure level (opens in a new tab) Checked on 19 November 2026.
- AIRAH: Residential Air Conditioning Best Practice Guide (Victoria), second edition 2026 (opens in a new tab) Checked on 19 November 2026.
- EPA Victoria: residential noise, updated 4 November 2026 (opens in a new tab) Checked on 19 November 2026.
- Energy Victoria: choosing the right reverse cycle air conditioner, updated 29 October 2026 (opens in a new tab) Checked on 19 November 2026.
- Your Home (Australian Government): heating and cooling (opens in a new tab) Checked on 19 November 2026.
- Mitsubishi Electric Australia: MSZ-AP wall split operating instructions (opens in a new tab) Checked on 19 November 2026.
- Daikin Australia: wall split operation manual, March 2026 (opens in a new tab) Checked on 19 November 2026.
- Rinnai Australia: slim ducted operation and installation manual (opens in a new tab) Checked on 19 November 2026.
- Daikin Australia: Lite series split system brochure (opens in a new tab) Checked on 20 November 2026.
- Mitsubishi Electric Australia: MSZ-AP series split system (opens in a new tab) Checked on 20 November 2026.
- Rinnai Australia: JX series split system brochure (opens in a new tab) Checked on 20 November 2026.
- Panasonic Australia: R32 inverter floor console UF (opens in a new tab) Checked on 19 November 2026.
- Panasonic Australia: air conditioning buyers guide (opens in a new tab) Checked on 19 November 2026.
- ABL Refrigeration: air conditioning services (opens in a new tab) ABL's own page. Checked on 19 November 2026.
Related pages
- Choosing an outdoor AC location: airflow, noise and access
Where the outdoor unit goes, in full.
- Floor console or wall-mounted air conditioner: which suits your room?
If the bedroom is used mostly for heating.
- Planning AC timers and schedules around household routines
Timers for night shifts and daytime sleep.
Planning a bedroom air conditioner?
Call ABL or send an enquiry, and have your worksheet and room plan ready.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
