Skip to the content

Ice machine cleaning and sanitising: an owner's plan and record

Who cleans what on a commercial ice machine, which products, how it goes back into use, when to clean sooner, and a plan and record to fill in.

Last updated

A commercial ice machine needs two kinds of care: what your staff do each day and week, and a clean and sanitise of the water system inside the machine that most manuals give to a trained service person, usually at least twice a year. Cleaning takes off scale and dirt, and sanitising kills what grows in a wet machine. The steps and products come from the manual for your model, so this guide gives you the plan around them: who does each job, how often, how the machine goes back into use, and a record that shows it was done.

How to use this guide

  1. Step 1: Find the manual

    For the ice maker, the bin and any filter.

    Go to The manual
  2. Step 2: Split the jobs

    Staff care, and the work for a trained person.

    Go to Who does what
  3. Step 3: Fill in the plan

    Then record each clean and sanitise.

    Go to the record

Start with the machine and its manual

An ice machine is often two or three products, each with its own care instructions: the ice maker, the bin or dispenser it sits on, and a water filter. Take the brand, model and serial number from the plate on each, and get the manual for each from your supplier or the maker's website. Write the manual's title and date at the top of your plan.

Makers differ on who may do the deeper work. Some print the whole water system clean in the owner manual. Others say it needs a trained technician because parts come out of the machine. Your manual decides, and where a job is not in it, it is not an owner job.

Why are cleaning and sanitising separate jobs?

Food Standards Australia New Zealand (opens in a new tab) puts it simply: cleaning removes dirt, grease and food waste, sanitising destroys microorganisms, and you clean before you sanitise. Under Standard 3.2.2 a food business has to keep its equipment clean, and keep food contact surfaces clean and sanitary. That is as at November 2026.

  • Cleaning an ice machine usually means descaling: an ice machine cleaner dissolves the lime scale and minerals the water leaves behind. It does not kill mould or slime.
  • Sanitising kills the mould, slime and bacteria that grow in a cold, wet machine. It works only on a surface that has already been cleaned.
  • A machine that looks clean may not be. The national guide to the food standards (opens in a new tab) says equipment that looks clean could still be contaminated if it has not been sanitised. Much of an ice machine's water system is out of sight until it is taken apart.

Which jobs are for your staff, and which for a trained person?

This is the usual split. Where your manual gives a job to someone else, or sets another interval, follow the manual.

Ice machine care: who usually does each job
JobUsually done byWhat it covers
Scoop, scoop holder and bin door handleStaff, every day.Clean and sanitise. Keep the scoop out of the ice between uses, on a clean tray or holder made of a smooth, hard material.
Inside of the bin, and the door and its sealStaff, as the manual for the bin sets: weekly on some, and every time the machine is cleaned on others.Empty the ice first. Clean, sanitise and let it air dry. The ice-making parts above the bin are not part of this job.
Outside of the machineStaff, weekly to monthly.Wipe down as the manual says. No water jet and no hose.
Air filter on an air-cooled machineStaff, where the manual makes it an owner job: checked about twice a month on some machines, and whenever it looks dirty on others.Take out, wash and refit as the manual describes. The condenser behind it is not part of this job.
Water filter cartridgeWhoever the filter's manual gives it to.Changed by date or by volume. See the guide to choosing an ice-machine water filter.
Water system: descale and sanitiseA trained service person on most machines, at least twice a year. A few manuals give it to the owner.The freezing surface, water trough, distributor, curtain and sensors, with parts taken out, then the bin sanitised with it.
CondenserA technician, at least once a year.Cleaned and checked. On a water-cooled machine, checked for scale.

Unplug or switch off the machine before staff clean inside the bin. None of the staff jobs in this table means opening a panel, reaching into the ice-making section or touching wiring. Taking parts out for the water system clean belongs with whoever the manual gives that job to, and wiring is for a technician.

Which cleaning products can you use?

Use the cleaner and sanitiser the manual for your model names, at the strength and contact time on their labels. This page gives no strengths, because they belong to the product and the machine. Makers' chemistry differs: one maker's instructions use a chlorine sanitiser, and another says chlorine attacks its freezing surface and asks for a nickel-safe cleaner.

  • Do not mix the cleaner and the sanitiser. Ice machine cleaner contains acid.
  • Wear gloves and eye protection when handling either, as the labels say.
  • Keep floor and toilet cleaners away from the machine. They are not suitable for food contact surfaces.
  • Check the manual before using alcohol. On some machines it cracks the plastic parts.
  • Using a product the manual does not name can damage the machine and affect its warranty.

How does the machine go back into use?

After a water system clean and sanitise, check these before ice from the machine is served again, and record each one:

  1. The old ice is gone. All ice from before the clean was thrown out, and the first ice made afterwards was discarded as the manual says.
  2. Everything is back in place. Every part, panel and screw is refitted, and nothing has fallen into the bin.
  3. Sanitised surfaces were left to air dry, unless the manual says to rinse them. Wiping with a cloth can bring germs back.
  4. The new ice looks, smells and tastes right. If it does not, stop using the machine and call for service.
  5. The record is filled in and signed off, with the date the machine went back into use.

When should you clean sooner, or call?

Reasons to clean sooner, stop using the ice or call
What you noticeWhat to do
Hard water, with scale building up between cleansShorten the interval. If the machine needs cleaning far more often than its manual says, have the water tested and a filter or treatment recommended. See the guide to choosing an ice-machine water filter.
Beer on tap, bread baked nearby, or a filter that takes out chlorineAirborne yeast grows in a cold, wet machine, and water without chlorine lets it. Plan to sanitise more often.
A clean or descale light on the machineThe machine has worked out it needs a clean. Write down the light and book the clean the manual calls for.
Mould or slime you can see, or ice that tastes or smells wrongStop using the ice and throw it out. Have the water system cleaned and sanitised before the machine is used again.
Something has fallen into the binTake it out, discard the ice it was in, and clean and sanitise the bin.
A boil water advisory on your supplyThe Australian Drinking Water Guidelines (opens in a new tab) say water should be boiled before it is used to make ice, so the machine cannot make ice you can serve while the advisory lasts. Turn it off, throw out the ice in the bin, and follow the advisory notice and your council's environmental health team. When the advisory is lifted, follow the water corporation's flushing advice. Before the machine's ice is served again, we recommend a new filter cartridge and a clean and sanitise of the water system, because advisory water has been through both.

If the machine is also making less ice, see the guide to an ice machine making less ice. For a food safety question, follow your food safety program or ask your council's environmental health team.

What records should you keep?

Under Standard 3.2.2A (opens in a new tab), a category one business, which is a caterer or food service business that processes unpackaged potentially hazardous food into food that is ready to eat and potentially hazardous, has to keep records that show critical controls are met, including cleaning and sanitising, or be able to show an authorised officer another way. Records are kept for 3 months. That is as at November 2026. The standard does not mention ice machines by name, and your council can tell you how it applies to your business.

Either way, a plan and a record are good practice. The FoodSmart template (opens in a new tab) for Victorian food businesses asks for a cleaning schedule that says what is cleaned, how often, how, and by whom. A useful entry gives the date, what was cleaned and sanitised, the products and the manual step, who did it, and what was done about anything wrong. It also tells a technician what has already been done.

Ice machine cleaning plan and record

Ice machine cleaning plan and record

Fill in the plan once from the manuals. Fill in the record after each water system clean and sanitise, then copy or print it.

Your answers stay on this open page. They are not saved or sent. Copy or print them before you leave.

The machine

The plan: who, and how often

Record of a water system clean and sanitise

Ice discarded before, and the first ice after
All parts back, nothing left in the bin
New ice looks, smells and tastes right

Who to call

We sell and repair ice machines for hospitality venues. If a clean turns up a leak, a fault light or ice that will not come right, call ABL with the plan and record in front of you, or send them with an enquiry from the ice machines page. For the rest of your refrigeration, see the guide to cleaning commercial fridges and coolrooms without wetting the electrics.

Sources (26)

Checked on 20 November 2026

Did a clean turn up a problem?

Call ABL with your plan and record in front of you, or send them with an enquiry.

Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.