Skip to the content

Ice machine repairs and sales in Gippsland

ABL sells and repairs commercial ice machines for pubs, cafes, clubs and motels in Gippsland. How much ice you need, the usual faults and what to tell us.

There are two ways into this page. If you are buying a machine, send an enquiry with the buying details below. If a machine has a fault, call ABL with its brand, its model and what it is doing.

Two ways to start
You want toHave this readyThen
Buy an ice machineThe kind of ice, how many people you serve on your busiest day, and where the machine would stand.Send an enquiry with the buying part of the record on this page.
Get a machine repairedThe brand, model and serial number from its plate, what it is doing, and any code or flashing light.Call ABL, or send the fault part of the record.

What ABL does with ice machines

ABL sells and repairs ice machines for hospitality: pubs, clubs, cafes, restaurants, motels and function venues. Tell us the brand and model when you call about a repair, so we can say whether we can help with that machine before anyone travels.

Ice machines on fishing boats and other vessels are a different job, with seawater and a moving deck to deal with. For those, see the marine ice machines page. Our other work is on the commercial refrigeration page.

What kind of ice do you need?

Kinds of ice and where each is used
IceWhat it isWhere it is used
Full cubeA clear, solid cube. It is clear because the water is rinsed away as the cube freezes.The general drinks ice for bars, restaurants, cafes and hotels.
Half cubeThe same cube in a thinner size. It packs tighter in a glass.High-volume drinks and blended drinks.
Gourmet cubeA larger, clear, individual cube that melts slowly.Spirits and premium drinks.
NuggetSmall, soft, chewable pieces. It is made continuously, not in batches.Soft drinks, dispensers, and hotel floors.
FlakeSmall soft flakes that mould around what they hold.Seafood, salad bar and produce displays. Not usually a drinks ice.

What kind of machine?

Three kinds of ice machine
MachineWhat it isWhat it suits
Self-contained, under the benchThe ice maker and its storage bin in one cabinet.A cafe, a small bar or a second ice point, where the volume is modest and space is tight.
Modular head on a binAn ice-making head that sits on a separate storage bin. The bin is chosen and bought separately.A busy bar, a club or a hotel, where the bin has to carry the venue through a peak.
DispenserIce released at the push of a button, so hands and scoops stay out of it.Guest floors, staff rooms and self-service points.

How much ice does a venue need?

A machine is rated by the kilograms of ice it makes in 24 hours. These are the usual starting figures. Work them from your busiest day, not an average one.

Usual daily ice figures to start from
VenueUsual figure a dayWhat changes it
Restaurant or cafeAbout 0.7 to 0.8 kg for each person served.How many of the drinks are iced, and whether ice also goes on a display.
Bar or cocktail loungeAbout 1.3 to 1.4 kg for each seat.Cocktails, ice wells and buckets for bottles.
Motel or hotel guest iceAbout 1.4 to 2.3 kg for each room.Whether guests fill a glass or an esky.
  • Add a margin. We usually allow 10 to 20 per cent on top for growth and for the hot week when everyone wants ice.
  • Check what the rating means. The headline figure is measured in a cool room with cold water. In a hot kitchen with warm tap water the same machine makes noticeably less, so ask for its output at the conditions in your kitchen.
  • The bin is the buffer. A machine makes ice all day and a venue uses it in a rush, so the bin has to hold enough for the peak.
  • Replacing a machine? Start from whether the old one kept up, and add any ice you have been buying in.

For the working, see the guide to sizing a hospitality ice machine.

What does the site need for an ice machine?

What an ice machine needs where it stands
What it needsUsual requirementWhat to check
AirAn air-cooled machine blows its heat into the room. It needs clear space around it: 15 to 20 cm is the usual minimum, depending on the model and the side, and more is better.Whether the spot is boxed in, or beside an oven, a dishwasher or a sunny window.
A room that is not too hotEach model has a temperature range it works in. The top of it is usually about 38 to 43°C.How hot the room gets on a summer service.
WaterCold drinking water at the pressure the model asks for, with a filter on the inlet.Where the nearest cold tap is.
A drainThe machine drains by gravity to a floor drain through an air gap, with a fall of about 2 cm for each metre of run. It is not joined straight to the sewer.Where the nearest floor drain is, and whether it is lower than the machine.
PowerIts own power point, as the plate on the machine states.Whether there is one within reach of the lead.

The manual for the model governs every one of these. Any new power point is work for a licensed electrician. Installing or altering any part of the cold water service to bring water to the machine, including a new tap, is water supply work, a class of plumbing work under the Plumbing Regulations 2018 (opens in a new tab), for a licensed or registered plumber. The same regulations say connecting an appliance's hose to an existing tap is not plumbing work. That is as at November 2026. A new floor drain or waste point is a plumber's job.

Air-cooled or water-cooled?

  • Air-cooled suits most venues. It needs clear air around it and a room that does not get too hot.
  • Water-cooled suits a hot or tight room, because its heat goes down the drain with the cooling water. That water is the cost: unless the machine is on a recirculating loop, it uses several times the water of an air-cooled one.
  • A remote condenser puts the heat outside the building, joined to the machine by refrigerant pipes.

For the trade-offs, see the guide to an air-cooled or water-cooled ice machine.

What drives the cost of an ice machine?

  • Capacity. How many kilograms a day, and how big a bin.
  • The kind of ice. Clearer ice takes more water to make.
  • How it is cooled. Air, water or a remote condenser.
  • The bin, which is a separate item on a modular machine.
  • The installation. The water connection, the drain, the power point and a filter.
  • The running cost. Power and water for as long as you own it.

Commercial ice makers supplied in Australia now come under a minimum energy performance standard (opens in a new tab), so ask for the energy and water figures of any machine you are quoted.

Ice machine faults, and what usually causes them

Look, write down what you see, and call. None of these checks opens the machine or needs a tool.

Common ice machine faults
What you noticeWhat to look at and write downWhat it usually comes down to
It makes no ice, or has stoppedIs the water tap on? Is the machine plugged in and the power point on? Is the air filter clogged, or the space around the machine blocked? Is the room hot? Note any light or code.No water, no power, or a machine that cannot get rid of its heat. Past those, a fault inside that needs a technician.
It makes too little ice, or is slowHow hot the room is, what stands beside the machine, the state of the air filter, and when the machine was last cleaned.A hot room, a blocked air filter, or scale on the surface the ice forms on. See the guide to an ice machine making less ice.
It stops before the bin is fullIs ice stuck under the flap at the ice chute, or packed in a lump in the bin?The machine thinks the bin is full. If nothing is stuck, the bin switch or bin thermostat needs adjusting or replacing.
Small, thin, cloudy or misshapen cubesIs the water tap fully open? When was the water filter last changed?Low water pressure, minerals in the water, or scale in the water system.
Ice that tastes or smells wrongWhen the machine was last cleaned and sanitised, the age of the water filter, and whether anything is being stored in the bin.Mould or slime in a machine that is overdue for sanitising, or something that has been kept in the ice.
Water on the floorDoes the drain hose run downhill all the way? Is the floor drain blocked?A drain that cannot drain, or a leak inside the machine.
A code or a flashing lightWrite down the code, or count the flashes, and note the model.Codes belong to each maker and model. The manual lists them.

The table gives usual causes, not a diagnosis. Repairs, the refrigeration circuit and anything electrical inside the machine are a technician's work. For the stop warning and what to do with stock when any refrigeration fails, see the coolroom and commercial fridge repairs page.

Who cleans what, and how often?

Care of a commercial ice machine
JobUsual intervalWho does it
Scoop and bin door handleCleaned and sanitised every day.Your staff.
Inside of the binCleaned weekly on some machines, and every time the machine is cleaned on others, as the manual for the bin says.Your staff.
Air filter on an air-cooled machineChecked about twice a month and washed when it is dirty.Your staff, where the manual makes it an owner job.
Water filter cartridgeChecked at each service and changed when it restricts the flow, which is often about every six months.Whoever the manual for the filter gives the job to.
Water system: descaled and sanitisedAt least twice a year.A technician on most machines. Check the manual for yours.
CondenserChecked and cleaned at least once a year.A technician.
  • Descaling and sanitising are two jobs. One takes off the mineral scale. The other kills what grows in a wet machine. A machine needs both.
  • Hard water shortens the interval. So does yeast in the air: a bar, a bakery or a brewery needs sanitising more often.
  • A filter is not a softener. It takes out sediment, not the dissolved minerals that make scale.

For a cleaning plan, see the guide to ice-machine cleaning and sanitising. For the filter, see the guide to choosing an ice-machine water filter.

Repair it or replace it?

What to weigh before a large repair to an ice machine
What to weighWhat to know
AgeSeven to ten years is a common life for a commercial ice machine, and its water and its care move that either way. Tell us how old yours is if you know.
The water it has run onWater quality decides more than anything else how long a machine lasts. Heavy scale on the freezing surface and in the water system is a sign of a hard life.
The refrigerantThe plate on the machine names its refrigerant. Many newer machines use a hydrocarbon, which is flammable, and WorkSafe Victoria (opens in a new tab) says technicians who work on them need to be competent to manage the flammability hazard. Work on a machine that holds a fluorocarbon refrigerant needs a national refrigerant handling licence (opens in a new tab).
WaterA water-cooled machine that sends its cooling water down the drain uses several times the water of an air-cooled one.
Whether it still suitsA venue that has grown may need more ice than any repair will give it.

We tell you what the repair involves and what a replacement would be. The decision is yours.

What to tell ABL

Ice machine enquiry

Fill in the part that applies, then paste it into an enquiry or read it out when you call.

Your answers stay on this open page. They are not saved or sent. Copy or print them before you leave.

The venue

Buying a machine

Ice you want
A cold water tap close by
A floor drain close by
A power point close by

A machine with a fault

A burning smell, a tripped breaker or water near the electricsIf yes, turn it off and leave it off.

Towns ABL covers

ABL is based in Bairnsdale and works across Gippsland, so tell us your town when you call. A town with a link has its own page.

If your town is not here, call and ask. See also service areas.

Sources (21)

Buying an ice machine, or fixing one?

Call ABL, or send an enquiry with the brand and model, or with your busiest day and where the machine would stand.

Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.