Skip to the content

Choosing a water filter for a commercial ice machine

What an ice machine needs from its water, what each kind of filter does and does not do, how to size and change one, and questions for your supplier.

Last updated

Choose an ice machine's water filter from two things: what the machine's manual asks of its water, and what is actually in your water. A sediment filter stops grit, carbon reduces chlorine taste and smell, and a scale inhibitor keeps hardness minerals from building up as scale. Softening and reverse osmosis change the water itself, and some machines do not accept that water. No one cartridge suits every machine and every supply, and no filter makes unsafe water safe or takes the place of cleaning and sanitising.

How to use this guide

  1. Step 1: Read the manual

    What the machine accepts and recommends.

    Go to The machine's needs
  2. Step 2: Know your water

    Town, tank or bore, and what the report says.

    Go to Your water
  3. Step 3: Ask the supplier

    Take the question sheet with you.

    Go to the record

What does your ice machine need from its water?

An ice machine needs cold drinking water. Beyond that, the manual for the model sets the limits the filter has to work within. The manuals we have read set no hardness or dissolved solids limit. They recommend filtration instead, and say the water decides how often the machine needs cleaning.

What to find in the machine's manual before choosing a filter
Look forWhy it matters for the filter
Water pressure rangeRanges differ widely: the top runs from about 400 kPa on some machines to 800 kPa on others, and the bottom from about 50 to 140 kPa. A filter costs some pressure and has its own minimum, so a site can suit the machine and not the filter. Above the maximum, the manual asks for a pressure-limiting valve.
Water temperature rangeFilters have their own temperature ranges too, and the two have to overlap.
A filter or softener recommendationSome manuals recommend a softener where the water scales. Some flake and nugget machine manuals advise against one, because the ice comes out wetter and production drops.
Reverse osmosis waterSome machines sense water by its conductivity and will not start on water that is too pure, so their manuals set a minimum. Reverse osmosis water can also be acidic enough to attack metal parts.
A water-cooled condenserThe water that becomes ice is filtered. The condenser water does not become ice and is not usually run through the filter: check the manual for the model. See the guide to an air-cooled or water-cooled ice machine.
The warrantySome warranties exclude faults from an installation or maintenance not done to the maker's guidelines. Read what yours says about water.

What is in your water?

  • Town water. Your water corporation tests the supply and publishes an annual drinking water quality report, which covers things such as chlorine, minerals and pH. Gippsland Water, for one, does not send customers individual test results and points them to that report. Ask the water corporation for the hardness and whether it disinfects with chlorine or chloramine.
  • One report, many places. A town-wide report combines samples from across the system and may not show seasonal change, so a filter supplier may suggest a test of the water at the venue.
  • Tank, bore, dam or creek water. Safe Food Victoria (opens in a new tab) says a business that relies on a private supply for drinking water must take all reasonable precautions to make sure it is safe. That is as at November 2026. The Department of Health guidelines (opens in a new tab) for these supplies ask for E. coli testing at a NATA-accredited laboratory, before a new treatment system is used, after it is altered, and after an event such as heavy rain or bushfire. A filter on the ice machine is not the treatment for the supply.
  • What you can see. Scale on the machine or around taps, cloudy ice, a chlorine taste and grit in the water are clues worth telling a supplier. They are not a test.

What does each kind of filter do, and not do?

Many ice machine cartridges combine the first three in one: fine filtration, carbon and a scale inhibitor. Softening and reverse osmosis are separate systems.

Kinds of water treatment for an ice machine
TreatmentWhat it doesWhat it does not doWatch for
Sediment, or fine filtrationCatches sand, rust and particles, rated in microns. Ice cartridges are often 0.5 micron, with a coarser 5 micron pre-filter on some.Remove dissolved minerals or chlorine.It blocks sooner on dirty water. Taking out fine particles also gives scale less to form on.
CarbonReduces chlorine taste and smell.It is not usually relied on to remove bacteria, parasites or viruses. A cyst claim, or a chloramine claim, is separate, and a cartridge may or may not make one.Water without chlorine lets slime grow faster in the machine. Some makers offer cartridges without carbon for venues with yeast in the air.
Scale inhibitorHolds hardness minerals in the water so they form less scale on the freezing surface.Remove the hardness.The machine still needs descaling, as its manual says.
SofteningRemoves hardness by swapping it for other dissolved salts.Remove microorganisms.Only where the machine maker allows it.
Reverse osmosisRemoves most minerals and contaminants.Suit every machine.Conductivity minimums, acidity and faster slime growth. Use it only within the machine maker's limits.

How is a filter sized to the machine?

  • Flow. The filter's rated service flow has to cover the rate at which the machine draws water. Ice machine cartridges are rated from about 1 to 9.5 litres a minute, and some health claims hold only at or below the rated flow.
  • Capacity. A cartridge is rated for a volume of water, from about 10,000 litres to 95,000 or more. A cube machine uses about 1.2 to 2 litres of water for each kilogram of ice, and a flake machine about 1 litre. At full output, a cube machine making 100 kg a day puts about 22,000 to 36,000 litres through its filter in six months.
  • Pressure loss. Water loses pressure through a filter, more as the cartridge clogs, and the cartridge's sheet gives the loss at a set flow. What is left after the filter has to be inside the machine's range.
  • Room to service it. An isolating valve before the filter, and the space below the cartridge that its instructions ask for to change it.

Makers often match cartridges to the machine's daily ice output. Ask for the filter the machine's maker lists for that model, or for the figures above if it is another brand.

When should the cartridge be changed?

Six months is the usual interval, and a cartridge's sheet may also set the longest it should stay in. Change it sooner when its rated litres are reached, when the flow drops, when a pressure gauge on the filter falls, or when a chlorine taste or smell comes back. A filter left too long can grow bacteria and release them into the water.

A new cartridge is flushed before use, as its maker says: from a few litres to ten minutes, depending on the cartridge. Agree with the supplier who changes it, write the date on the cartridge, and keep it in the plan in the guide to ice-machine cleaning and sanitising.

What can a filter not do?

  • It does not make unsafe water safe. Filter makers say their cartridges are not for water that is microbiologically unsafe or of unknown quality. Under a boil water advisory, stop using the machine's ice, as the guide to ice-machine cleaning and sanitising explains. Advisory water has been through the cartridge, so plan a new one before the machine's ice is served again. Water corporations give households the same advice for a fridge filter.
  • It does not replace cleaning and sanitising. A scale inhibitor slows scale and a filter catches grit, but mould and slime still grow in a wet machine. The water system still needs descaling and sanitising, usually at least twice a year.
  • A certification covers the claims listed for it. A cartridge may be certified to NSF/ANSI 42 for chlorine, taste and odour, to 53 for health effects such as cysts, or to 401 for emerging contaminants. Check which claims apply to the cartridge you are offered. In Australia, drinking water treatment filters and commercial ice makers are both on the WaterMark Schedule of Products (opens in a new tab), the list of plumbing products that need WaterMark certification. That is as at November 2026.

Fitting a filter means connecting into the water supply to the machine. Depending on how it is fitted, that can be plumbing work. Ask the supplier who will fit yours, and whether a licensed plumber is needed.

Questions for your filter supplier

Ice machine water filter question sheet

Fill in the machine and your water first, then take the sheet to the supplier and fill in their answers. Copy or print it.

Your answers stay on this open page. They are not saved or sent. Copy or print them before you leave.

The machine

Your water

Supply

The supplier's answers

An isolating valve, and room below the cartridge to change it

Who to call

We sell and repair ice machines for hospitality venues. If your machine is scaling up, making cloudy or thin ice, or needing a clean more often than its manual says, call ABL with its brand and model, or send an enquiry from the ice machines page. If it is making less ice, see the guide to an ice machine making less ice.

Sources (29)

Checked on 20 November 2026

Machine scaling up or making cloudy ice?

Call ABL with the brand and model and what the machine is doing.

Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.