Planning coolroom loading for a harvest peak: cooling versus holding
Plan a harvest peak: field heat, cooling duty against holding space, cooling methods, loading for airflow, peak-day options and a day plan to fill in.
Last updated
A coolroom built to hold cold produce usually cannot pull the field heat out of a full day of warm harvest quickly. Room cooling holds temperature well, but packed bins and pallets take a day or more to cool in it. So a harvest peak needs two things planned separately: the cooling duty, which is how much warm produce has to come down in temperature each day and how fast, and the holding volume, which is how much cooled produce the room has to keep until it leaves.
How to use this guide
Step 2: Fill in the day plan
Times, quantities and produce temperatures for a peak day.
Go to the record
Why does field heat matter so much?
Produce comes in at the temperature of the field, and it is still alive: it respires and gives off heat of its own, faster the warmer it is. Taking that field heat out quickly, before anything else is done to the produce, slows the clock on its quality and shelf life. As a rough guide for very perishable crops in hot weather, an hour of delay in cooling costs about a day of shelf life. It does not hold for every crop.
Produce left in the sun heats further, and can soon be 4 to 6°C warmer than the air. Above about 30°C, vegetables can fail to colour, yellow, soften or wilt. So the cheapest cooling is the heat that never gets in:
- harvest in the morning, or at night, while produce is coolest, except for crops that bruise or mark when picked turgid in the morning
- keep filled bins in the shade, under light-coloured shade cloth or loosely covered, if they cannot go straight to the shed
- move bins to cooling as soon as they are full
- shade the packing area and the coolroom building itself
Growers and primary processors of leafy vegetables and melons have a legal duty here too. As at November 2026, Food Standards Australia New Zealand's primary production standards (opens in a new tab) require them to keep harvested produce at a temperature that does not make it unsafe or unsuitable to eat. It suggests pre-cooling to remove field heat, and keeping washed and packed leafy vegetables at 0 to 5°C.
Cooling capacity and holding capacity are different jobs
A room that holds produce at temperature needs only modest refrigeration: enough for slow cooling and for the heat that comes in through the walls and doors. That is why it is cheaper to build and run, and why it struggles when a large load of warm produce has to come down fast. Most packhouse coolrooms hold produce that has already been cooled before it ships.
| Question | Cooling duty | Holding volume |
|---|---|---|
| What it has to do | Take the field heat out of each day's arrivals, quickly. | Keep cooled produce at its storage temperature until it leaves. |
| What sets it | The quantity arriving, its temperature on arrival, the target temperature, and the hours allowed to reach it. | Floor space, stacking height, the gaps air needs, and how long each lot stays. |
| What limits it | Refrigeration capacity, and how well cold air reaches the produce. | Space, door traffic, and how often produce is dispatched. |
| How you know it is working | Produce temperature, measured in the produce, falls to target in the time you planned. | The room holds its set temperature through the day, and cold produce does not warm or sweat. |
A cooling duty is written as a quantity, two temperatures and a time. One design example for broccoli asks a room to bring 20 harvested bins, a fifth of the room, from 25°C to 5°C within 12 hours. Your crop, packaging and arrival temperature set your own numbers, but writing them in that form is what lets a refrigeration designer size the job.
The refrigeration works hardest at the start of cooling, when the produce is warmest. Loading in batches through the day spreads that peak: in one Ontario design for peaches, staggered loading let the refrigeration be sized at about two thirds of what a single full load would need. Once a room can hold its set temperature, more refrigeration does not cool produce faster, because the airflow through the packaging sets the pace. But a room that is short of refrigeration lets its air temperature climb every time warm produce goes in, and the cold produce already there warms with it.
A room sized only to store produce usually has about 10 to 14 kW of refrigeration per 1,000 cubic metres. Taking field heat out of a full day of harvest in hours needs far more, which is why a room cannot be judged by its volume alone. Adding forced-air cooling to a room built for room cooling may also need more refrigeration behind it.
How fast does each cooling method work?
| Method | Typical cooling time | Suits | Watch for |
|---|---|---|---|
| Room cooling | 20 to 100 hours | Less perishable and cool-season crops, such as potatoes, onions, cabbage, apples and citrus. | Slow for packed pallets and bulk bins at summer field temperatures. Slow cooling adds weight loss and condensation. |
| Forced air | 1 to 10 hours | Most fruit and vegetables in vented cartons or bins. | Packaging needs vents, about 5% of the side area in most guidance, and the air must be made to go through the produce, not around it. The fans add heat to the room. |
| Hydrocooling | About 0.1 to 1 hour | Crops that tolerate wetting. | The water chiller needs the capacity, recirculated water needs a sanitiser, the water should be clean town water or similar, and wet produce is prone to rots. |
| Vacuum cooling | About 0.3 to 2 hours, and 20 to 40 minutes for leafy crops | Leafy crops. | Not for waxy produce, or produce with little surface for its size, such as carrots, potatoes or zucchini. Produce loses about 1% of its weight for every 5 to 6°C unless water is sprayed during the cycle. |
| Ice | About 0.1 to 0.3 hours, longer for top icing | Holding temperature during storage and transport, for some crops. | An inefficient way to cool vegetables in the first place. |
How much faster forced air is than room cooling depends on the set-up. Forced air can cool ten times faster than room cooling, or more. A simple farm-built unit that blows the coolroom's own air through the produce is nearer 1.2 to 2.2 times faster. Produce cooled by water or vacuum goes into a coolroom straight away. A refrigerated truck or trailer holds produce at the temperature it was loaded at and does not cool it, so cool before you load.
When is produce cool enough?
Cooling slows as produce gets close to the air temperature, so it is judged by the seven-eighths cooling time: the time to remove seven-eighths of the gap between the produce's starting temperature and the cooling air. Produce at 25°C in a room at 5°C is seven-eighths cooled at 7.5°C. Times differ so much with crop, packaging and airflow that they are measured on your own set-up, not taken from a table.
How do I plan a peak harvest day?
Walk through the day from the first bin to the last truck. Plan from the peak week of the season, not an average one, and remember that harvest volumes move with the weather and the labour you have.
| Stage | Plan for |
|---|---|
| Before harvest | The room at its set temperature, yesterday's dispatch gone, holding space cleared, and the cooling lane or area empty and ready. |
| Picking | Pick in the cool of the morning. Bins into shade. Probe the first produce in and write down its temperature. |
| Each arrival | Write down the time, the quantity and the produce temperature. Put it into a cooling slot, not between cold stock. |
| Cooling | Fill one forced-air lane completely before starting the next. Check produce temperature in the produce, and move it to holding when it reaches target. |
| Holding | Stack for airflow, keep the room at its set temperature, and keep door openings short. |
| Dispatch | Send produce cold. Keep space free for a truck that runs late, because shipping delays fill a room as fast as harvest does. |
| Fallback | Decide beforehand what happens if the room falls behind: slower picking, more frequent dispatch, extra holding space, or a second refrigeration unit. |
How should produce be loaded for airflow?
- Leave at least 10 cm between stacks and the walls, and 10 to 15 cm where a wall takes the sun.
- Leave 25 cm or more between the top of the stacks and the evaporator fans.
- Run pallet skids parallel to the direction of the cooling air, towards the refrigeration.
- In a small room, leave about 2.5 cm between stacks of boxes, and use vented boxes, which cool much faster than unvented ones.
- Do not block the airflow. A blocked room develops warm spots inside packed pallets.
Can warm and cold produce share a room?
Only with care. Warm cartons stacked among cold ones warm the cold ones, and warm, moist air from new produce makes cold produce sweat. Cooling in a separate room or area, then moving produce to holding, protects the cold stock but adds handling and door traffic. Cooling and holding in one room saves that, but needs enough refrigeration to absorb each warm batch. Some crops also give off ethylene, which speeds the ageing of others, so check that crops sharing a room suit each other.
How do I measure produce temperature?
Measure the produce, not the room. Push an instant-read probe into the centre of a piece of produce and discard the piece you probed. The outside of a bin or pallet can read very differently from its centre: in one example of produce stored on a Victorian farm, the centre of a pallet was still warmer than its outside after five days in cold storage. Take readings at several places in the room, and move stacks that are cooling slowly. A data logger in the produce gives you the whole curve, which is how you find your own seven-eighths cooling time. The guide to food temperature and refrigerated air temperature explains why the two readings differ.
What can I do when the peak outruns the room?
| Option | What it does |
|---|---|
| Pick earlier or at night | Brings produce in cooler, so there is less heat to take out. |
| Shade bins in the field and at the shed | Stops produce gaining heat while it waits. |
| Stagger arrivals through the day | Spreads the cooling load, so the room does not take its whole peak at once. |
| Add forced air for the warm produce | A simple fan unit on top of vented bins can work for smaller volumes when room space is tight. It may need more refrigeration behind it. |
| Separate cooling from holding | Cool in one room or area, hold in another, so warm batches do not warm the cold stock. |
| Dispatch more often | Frees holding space for the next day of harvest. |
| Extra holding space | A hired coolroom or a refrigerated container holds produce at the temperature it goes in at. Put produce in it already cooled, unless its refrigeration is sized for field heat. |
| Two refrigeration units instead of one | If one fails at the peak, the other still gives some cooling. |
| Cull before storing | Space and cooling spent on produce that will not sell is lost to produce that will. |
ABL hires out coolrooms, and the coolroom hire page explains how to ask for one. For a peak you can see coming, ask well ahead rather than on the day.
What goes into a brief for a new or bigger harvest coolroom?
Around Lindenow, on the Mitchell River flats west of Bairnsdale, a wide variety of vegetables is grown, much of it for fresh markets. A designer sizes a harvest coolroom for the worst day of the season, so the brief describes that day, not an average one. Bring:
- the crops, and the mix of them at the busiest time of the season
- the quantity arriving each day through the season, with the peak week marked
- the produce temperature on arrival on a hot day, and the target temperature with the hours allowed to reach it
- how long produce is held, and how often it is dispatched
- the packaging, and whether it is vented
- the cooling method you use or want
- door and forklift traffic during the peak
- what happens if a refrigeration unit fails at the peak
- where the room will stand: sun, shade and the roof over it
- how the season has been changing, such as earlier varieties or more volume, since warmer produce or more of it needs more refrigeration than before
Where the room should stand is covered in the guide to indoor or outdoor coolroom placement, and the build itself on our coolrooms page.
Harvest peak day plan
Who can help with which part?
A refrigeration technician can check that a room holds its set temperature, how it recovers after loading, and whether its refrigeration suits the cooling duty you have written down. The guide to coolroom temperature recovery covers a room that is slow to come back after doors close. ABL's refrigeration work includes cold storage for produce on farms, and our farm and dairy refrigeration page explains how to book. Have your day plan in front of you when you call.
Sources (20)
Checked on 19 November 2026
- Postharvest management of vegetables (Hort Innovation VG13083): cooling methods (opens in a new tab)
- Postharvest management of vegetables (Hort Innovation VG13083): cool rooms (opens in a new tab)
- Postharvest management of vegetables (Hort Innovation VG13083): cooling rates (opens in a new tab)
- Postharvest management of vegetables (Hort Innovation VG13083): ethylene (opens in a new tab)
- Postharvest management of vegetables (Hort Innovation VG13083): managing quality (opens in a new tab)
- Food Standards Australia New Zealand: temperature control for horticulture, updated 1 October 2025 (opens in a new tab)
- Food Standards Australia New Zealand: premises and equipment for horticulture, updated 1 October 2025 (opens in a new tab)
- Ontario Ministry of Agriculture, Food and Agribusiness: forced-air cooling systems for fresh fruits and vegetables, 2024 (opens in a new tab)
- Ontario Ministry of Agriculture, Food and Agribusiness: troubleshooting cold storage problems, 2024 (opens in a new tab)
- NC State Extension: room cooling, postharvest engineering chapter 3e, May 2025 (opens in a new tab)
- NC State Extension: forced-air cooling, postharvest engineering chapter 3a, May 2025 (opens in a new tab)
- NC State Extension: refrigeration load, postharvest engineering chapter 5, May 2025 (opens in a new tab)
- USDA Agriculture Handbook 66: precooling and storage facilities, revised February 2016 (opens in a new tab)
- FAO and UC Davis: small-scale postharvest handling practices, harvesting and preparation (opens in a new tab)
- FAO and UC Davis: small-scale postharvest handling practices, temperature control (opens in a new tab)
- Queensland Department of Primary Industries: Australian postharvest technologies for fresh fruits and vegetables, 2001 (opens in a new tab)
- University of Vermont Extension: forced air cooling, field trial results, June 2019 (opens in a new tab)
- Victorian Places: Lindenow and Lindenow South (opens in a new tab)
- East Gippsland Catchment Management Authority: a cluster of activity in Lindenow (opens in a new tab)
- ABL Refrigeration: commercial refrigeration services (opens in a new tab) ABL's own page.
Related pages
- Coolroom temperature recovery: load, conditions and fault information
When a room is slow to come back to temperature after loading.
- Food temperature and fridge readings: understanding the difference
Why produce and room air read differently.
- Organising commercial cold storage for stock access and food protection
Laying out a room so stock is easy to reach and keeps cold.
Planning for the next harvest peak?
Call ABL with your day plan in front of you, or send an enquiry.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
