Cooling cooked food: blast chiller, blast freezer or storage equipment
How to match cooling cooked food to the right equipment: the two-stage rule, blast chiller or freezer, batch and tray details, and a matrix to fill in.
Last updated
Choose cooling equipment from the food process, not from a catalogue. Cooling a hot batch and holding cold food are two different jobs: a blast chiller or blast freezer is built to pull a cooked batch down fast, and a storage fridge, coolroom or freezer is built to hold food that is already cold. A business that cools cooked food needs a cooling process it has checked.
How to use this guide
Step 1: Check the cooling rule
The two stages, and what counts as another process.
Go to The cooling ruleStep 2: Fill in the matrix
Batch, trays, programme and the evidence from a trial batch.
Go to the record
What does the food standard require when you cool cooked food?
The requirement is clause 7(3) of Standard 3.2.2 in the Food Standards Code. Safe Food Australia (opens in a new tab), FSANZ's guide to the standard, sets it out: "A food business must, when cooling cooked, potentially hazardous food, cool the food: (a) within two hours, from 60°C to 21°C; and (b) within a further four hours, from 21°C to 5°C, unless the food business demonstrates that the cooling process used will not adversely affect the microbiological safety of the food."
| Stage | Food temperature | Time allowed |
|---|---|---|
| First stage | From 60°C to 21°C | Within two hours |
| Second stage | From 21°C to 5°C | Within a further four hours |
The cooling time starts once the food has dropped to 60°C after cooking. Cooking does not destroy the spores of some food poisoning bacteria, and their growth is greatest between 21°C and 60°C, which is why the first stage is the shorter one.
Outside cooling, FSANZ (opens in a new tab) explains the temperature rule in Standard 3.2.2: potentially hazardous food is kept at 5°C or below or at 60°C or above, unless the business can show that another temperature is safe, and frozen food stays frozen.
FSANZ (opens in a new tab) says this mandatory two-stage cooling is separate from its 2-hour/4-hour rule (opens in a new tab), which is a guide for refrigerated food. Food cooled by the two-stage process can be stored in the fridge to use later. If it then comes out of refrigeration, the clock starts again and the 2-hour/4-hour guide can be followed.
Another process the business can show is safe
The standard allows a different cooling process if the business demonstrates that it will not adversely affect the microbiological safety of the food. Safe Food Australia lists ways to show that, such as a food safety program or a process backed by documented sound scientific evidence. Its appendix on cooling meats (opens in a new tab) gives alternative cooling for whole cooked meats such as hams and processed sausages, which are slow to cool, and says an alternative process should be checked with the enforcement agency. In Victoria, Safe Food Victoria (opens in a new tab) licenses dairy, meat and seafood businesses, and councils register most other food businesses.
Cooling records under Standard 3.2.2A
Standard 3.2.2A (opens in a new tab) applies to food service, catering and retail businesses that handle unpackaged, potentially hazardous food that is ready to eat. A category one business, a caterer or food service business that makes that food ready to eat and serves it, has to make a record that its cooling meets the standard, unless it can show an authorised officer in another way. FSANZ's evidence tool (opens in a new tab) explains what counts as a record and how long a category one business keeps it. Your food safety program, your council (opens in a new tab) or Safe Food Victoria tells you what applies to your business.
Why is a storage fridge not a cooling process?
A storage fridge, coolroom or freezer is designed to hold food that is already chilled or frozen. Put a large hot batch in and it cools slowly, it warms the food already stored there and it makes the refrigeration work harder. Safe Food Australia warns that cooked food left to cool in large volumes in a cool room can let the bacteria that survive cooking grow to dangerous levels, and that a lot of hot food in a refrigerator reduces its cooling capacity.
Its own example is a restaurant that cooled a rice cooker's batch in one container in the coolroom overnight. Checking the centre showed the rice was not reaching 21°C within two hours and 5°C within the next four. Split onto two shallow trays, it did, and the business wrote that method into its procedure. So a storage fridge is not a cooling process in itself. It can be part of one only when you have measured that your batch, in your containers, meets both stages.
Not every business needs a blast chiller. FSANZ's tips (opens in a new tab) for cooling faster include smaller portions in shallow containers, stirring liquids often, water or ice baths, air flowing around the container on a rack, adding ice as an ingredient, and rapid-cooling equipment such as a blast chiller. Safe Food Australia gives large shallow containers about 5 cm deep as an example. Which method you use depends on your food, your batch sizes and what you can show works.
| Point | Rapid cooling: blast chiller or blast freezer | Storage: fridge, coolroom or freezer |
|---|---|---|
| Built for | Taking a hot batch down to chilled or frozen, one cycle at a time. | Holding food that is already chilled or frozen. |
| Rated by | Kilograms per cycle, from a stated start temperature to a stated end temperature in a stated time. | Storage space, and the temperature it holds. |
| Controls | A programme, and a cycle that ends on a food probe or a timer. | A controller that holds a set temperature. |
| A hot batch inside | What it is for. | Cools slowly, warms the stored food and works the plant harder. |
For how much storage you need and whether a coolroom or cabinets suit it, see the guide to choosing between a coolroom and commercial fridges.
Blast chiller or blast freezer?
Both pull heat out of a hot batch with a fast flow of very cold air. A blast chiller takes the food down to about 3°C at the core. A blast freezer carries on until the food is frozen, which usually takes up to about four hours for a full load. Figures differ between models, so the manual for the model decides.
Choose by what happens to the food next. Food that will be stored chilled needs a blast chiller, then a fridge or coolroom. Food that will be stored frozen needs a blast freezer, then a freezer that keeps it frozen hard. How long the food is kept chilled or frozen is set by your own food safety procedure, not by the machine. Many machines hold the food chilled or frozen when a cycle ends, so a batch loaded late in the day can come out in the morning, but the finished food is then stored in a fridge, coolroom or freezer.
A frozen-storage room against a blast freezer
A freezer room holds stock that is already frozen and keeps it frozen hard. The food standard sets no temperature for frozen storage, and Safe Food Australia points to the food maker's storage instructions. A freezer room is not built to freeze a production batch. A warm batch in a very cold room does not freeze fast: the food dries out and takes a long time to come down, and the warm product loads plant that was sized to hold temperature.
Blast freezing, like blast chilling, is a short, heavy load: fast heat removal, strong airflow and plant sized for it. In larger plants, blast freezers sit beside holding freezers that store the frozen product, and the blast freezers run colder. A walk-in blast freezer is built heavier too, with thicker panels than a freezer room, for example at least 200 mm against 150 mm. So a freezer room does not become a blast freezer by turning it down. If your production needs freezing in batches, plan a blast freezer for the batch and a freezer room or cabinets for the stock.
Combined blast chiller and freezer machines
A combined machine blast chills or blast freezes in one cabinet. On some, the rated batch is the same for chilling and freezing.
| Point | One combined machine | A separate chiller and freezer |
|---|---|---|
| Floor space | One cabinet. | Two cabinets, or two rooms. |
| Chilling and freezing in one day | One cycle at a time, and a freeze cycle runs longer than a chill. On some machines each cycle ends with an automatic defrost, and a new cycle cannot be set during a cycle or a defrost, or for a few minutes after it. | Chilling and freezing can run at the same time. |
| If one stops | Both processes stop. | The other keeps working. |
Count the chill and freeze cycles your busiest production day needs, with the defrost after each, and check that one cabinet can fit them in.
What does a blast chiller's capacity rating mean?
Blast chillers are rated in kilograms per cycle, and the figure holds only under the conditions it was measured in. A typical reach-in rating reads 30 kg from 90°C to 3°C in under 90 minutes, with the room at up to 43°C. A typical roll-in rating reads 90 kg per cycle, measured with uncovered dense food such as mashed potato, and times vary with the container, the food and how well it conducts heat. Your own food, in your own trays, may take longer.
A 90-minute figure is the maker's own test target, not the Australian requirement.
| Ask for | Why it matters |
|---|---|
| Batch mass per cycle, chilling and freezing | It is the most the machine is rated to take in one cycle: a full load. |
| Start and end temperature, and the time | Ratings start from different temperatures. Some machines take food at 90°C and some only up to 70°C. |
| Test food, depth and container | A test food in an uncovered pan cools differently from your food in your containers. |
| Room temperature | On some reach-ins, food can go in at up to 90°C when the room is below 35°C, but must be under 70°C when the room is 35°C to 43°C. |
| Trays or trolley | How many trays, which sizes and which trolley it takes. The guide to choosing a refrigerated preparation counter covers tray sizes that move from oven to chiller to storage. |
Ratings run from about 10 kg in a compact model to about 320 kg in a large roll-in. To size one, start from your largest batch in kilograms and how many batches your busiest production day makes. If you cook on fewer days than you serve, such as five days of cooking for seven days of meals, size for the production days, and allow some extra for a menu that grows.
Batch and container details that change cooling
How fast a batch cools depends on how much there is, how dense it is and what it sits in. Large amounts cool slower than small ones, the centre cools last, and dense food cools slower than liquid.
- Depth. Shallow layers cool faster than deep ones. Ratings usually assume food no more than about 50 mm deep.
- Container. Metal and foil conduct heat. Plastic insulates the food from the cold air. A lid slows chilling, though it can stop delicate food drying out.
- Pan size. A pan too big for the job can leave the centre warm, because the cold air does not reach it.
- Spacing. Air needs to reach every side of each container. Stacking containers on each other slows chilling a great deal. Keep the air ducts clear and spread the load evenly.
- Load, then start. Load the batch before starting the cycle, and keep the door shut until it ends.
For each recipe, write down the batch weight, the container size and material, the food depth, whether it is covered, how many trays and where they sit. Those details are what make a trial batch repeatable.
Hard and soft chilling programmes
Many blast chillers offer a soft and a hard chill, and the difference is the air temperature in the cabinet. Soft chill keeps the air near 0°C, so delicate food such as fish, vegetables, rice and pastry chills without forming ice crystals. Hard chill drops the air well below freezing for dense food such as meat, casseroles and lasagne, and brings the food down faster, close to frozen. Hard chill air usually runs between minus 10°C and minus 20°C.
Some machines add automatic programmes by food type, or let you save your own. The names, air temperatures and programmes differ by model, so the manual for the model decides. Choose the programme for the food's quality, and check it with your own batch.
Probe-controlled or timed cycles?
A timed cycle runs for a set time, usually about 90 minutes for a chill and about four hours for a freeze, then ends whether or not the food has reached temperature. A probe cycle ends when the food probe reads the target, usually about 3°C at the core for a chill. A probe cycle shows that the food got there, and it stops as soon as it does, which saves energy. A timed cycle shows only that the time passed, so check the core temperature with a probe thermometer when it ends.
- Where the probe goes. Into the part that takes longest to cool, usually the centre of the thickest piece, on a tray in the middle of the load.
- More than one probe. Some chillers take several probes, or one probe with several sensors along it, so more than one point in the batch is read.
- Your own thermometer. A business that handles potentially hazardous food needs a thermometer (opens in a new tab) accurate to within 1°C. Use it to check the food at the end of a timed cycle, and whenever you try a recipe or batch size for the first time.
For why a display reading and the food's own temperature can differ, see the guide to food temperature and fridge readings.
Linking a combi oven to blast chilling
Plan the move from oven to chiller as one step. The cooling time starts when the food has dropped to 60°C after cooking, and Safe Food Australia's cooling template (opens in a new tab) starts its record at that point, so note when it happens and when the batch goes into the chiller.
- Pans and trolleys that fit both. Use containers that fit the oven, the chiller and storage. Some roll-in chillers take a loaded combi oven trolley as it is.
- The chiller ready first. The chiller has to be at its running temperature before the batch goes in. Let it run for about half an hour first.
- Matched equipment. Some chillers can be stacked with the maker's combi oven or connected to it.
- Plant, power and drain. On some roll-ins, the condensing unit is separate, the supply is three phase and the unit connects to a drain. A new supply is a job for a licensed electrician: Energy Safe Victoria (opens in a new tab) says all fixed electrical installation work requires a licensed electrician.
Small batches in a large blast chiller
A chiller's rating is for a full load, and it also takes less. When production swings a lot from day to day, these help:
- Space the trays out. With less than a full load, spread the trays evenly through the cabinet so the food chills evenly.
- Use a probe cycle, so a small batch does not run the full time.
- Check the biggest batch too. A trial on a small batch does not show how a full one cools.
Production stages in catering, meal preparation and manufacturing
In a production kitchen, each stage has its own equipment duty. Plan cooling, holding and dispatch as separate duties, even where they share a room.
| Stage | Equipment duty | What shows it is working |
|---|---|---|
| Cool | A blast chiller, blast freezer or another checked method takes the batch through both stages. | Times and core temperatures from 60°C to 21°C and on to 5°C. |
| Hold chilled | A fridge or coolroom keeps the cooled food cold, apart from raw food. | Storage temperature records, and food temperatures checked with a probe. |
| Hold frozen | A freezer or freezer room keeps frozen food frozen hard. | Freezer temperature records, and stock that is hard to the touch. |
| Portion, assemble and pack | Food out of refrigeration only as long as the job takes, then straight back. | Times out of refrigeration, or a written procedure staff follow. |
| Dispatch | Insulated containers or refrigerated transport that keep cold food cold and frozen food frozen hard. | Food temperatures at loading and on arrival. |
Catering production and chilled-food staging
A caterer that cooks the day before an event cooks, cools, holds, transports, then reheats or serves. In Safe Food Australia's caterer example, either the largest food volume in each batch is monitored and recorded, or a written procedure is used where the size, food type and process stay the same and the temperatures have been checked before. Plan chilled holding for the whole event, apart from raw stock, and transport (opens in a new tab) that keeps cold food at 5°C or colder and hot food at 60°C or hotter.
Chilled meal-preparation stages
A business that sells packaged chilled meals cooks, portions, cools, packs, holds and dispatches. Portioning into shallow containers before cooling speeds the cooling. If meals are cooled in their sealed packs, check the cooling in the packs you actually use: a lid and a plastic tray slow chilling compared with an open metal pan. Hold finished meals apart from raw ingredients, with chilled holding sized for a full production run.
A small food manufacturer
A small manufacturer has three duties to keep apart: process cooling for cooked product, storage for ingredients, and holding for finished stock. Process cooling, whether a blast chiller or a blast room, is sized for the batch and how fast it has to come down, which calls for high short-term capacity. Ingredient and finished-stock rooms are sized for what they hold and how often they are opened. For the rooms themselves, see coolroom installation.
Records from a blast-chilling cycle
Many blast chillers record each cycle, by printer, data port, USB or a connection to a monitoring system. Some show how long the last cycle took. A cycle record shows what the machine's probe read where it was placed, so note the probe position with it.
For the cooling stages, Safe Food Australia's guide to Standard 3.2.2A (opens in a new tab) lists what a category one business needs to record for cooling: the time the food took to go from 60°C to 21°C, then from 21°C to 5°C, and the date. Its suggested frequency is per batch, or as often as the business's written procedure sets. Safe Food Australia's cooling template also has the food, the core temperature at the end of cooking, the time cooling started, any corrective action and the initials of the person who checked.
FSANZ counts a data logger graph, a verified recipe or written procedure, and notes on paper or a screen as records. A missing reading stays missing: note what happened and follow your food safety procedure for the batch. The record shows what happened. Decisions about the food stay with the business.
For storage temperature records, see the guide to commercial refrigeration temperature records. Logging and alarms for fridges and coolrooms are covered on the temperature monitoring page.
Evidence that the process works
Before you buy, and again when a recipe or batch size changes, look for evidence that the process works under conditions like yours. Three kinds help.
- The maker's rating and its conditions, in writing. Batch mass, start and end temperatures, time, test food, depth, container, and the room temperature it was rated for.
- A trial of your hardest batch. Your largest, densest batch in your usual containers, with the time and core temperature when cooling starts at 60°C, the time it reached 21°C, the time it reached 5°C, and how the cycle ended.
- A written procedure. Once a method works, write down the recipe, batch size, containers, programme and probe position, and use it the same way each time.
If you use a cooling process other than the two stages, keep the evidence the standard asks for and check it with your council or Safe Food Victoria. Equipment is one part of the process: the business shows that the whole process works.
Freeze-drying is a different process
Freeze-drying is a separate process in a separate machine: the food is frozen, then a vacuum draws the water out as vapour. A blast freezer does not do it, and this guide does not cover it.
Rapid-cooling and storage equipment matrix
Choosing and supplying the equipment
ABL supplies commercial refrigeration equipment. Send the matrix with an enquiry from the equipment supply page, or have it in front of you when you call, and we can talk through which equipment duty fits your process. The hospitality refrigeration page covers kitchen refrigeration more widely. For a blast chiller, fridge or coolroom you already have that no longer pulls down as it did, see refrigeration repairs.
Sources (27)
Checked on 19 November 2026
- ABL Refrigeration: commercial refrigeration services (opens in a new tab) ABL's own page.
- Food Standards Australia New Zealand: Safe Food Australia, chapter 3.2.2 (April 2026 file) (opens in a new tab)
- Food Standards Australia New Zealand: Safe Food Australia, chapter 3.2.2A (opens in a new tab)
- Food Standards Australia New Zealand: Safe Food Australia, Appendix 5, cooling of meats after cooking (opens in a new tab)
- Food Standards Australia New Zealand: Safe Food Australia, Appendix 8, template examples (opens in a new tab)
- Food Standards Australia New Zealand: cooling and reheating food, updated 30 September 2025 (opens in a new tab)
- Food Standards Australia New Zealand: 2-hour/4-hour rule, updated 30 September 2025 (opens in a new tab)
- Food Standards Australia New Zealand: keeping food at the right temperature, updated 30 September 2025 (opens in a new tab)
- Food Standards Australia New Zealand: Standard 3.2.2A food safety management tools, updated 1 October 2025 (opens in a new tab)
- Food Standards Australia New Zealand: evidence tool, updated 1 October 2025 (opens in a new tab)
- Food Standards Australia New Zealand: thermometers, updated 1 October 2025 (opens in a new tab)
- Food Standards Australia New Zealand: transporting food safely, updated 1 October 2025 (opens in a new tab)
- Safe Food Victoria: home page, licensing and councils (opens in a new tab)
- Safe Food Victoria: local council registered food businesses, updated 29 June 2026 (opens in a new tab)
- Energy Safe Victoria: Restricted Electrical Worker's licence, reviewed 1 July 2026 (opens in a new tab)
- Williams Refrigeration Australia: guide to cook-chill (opens in a new tab)
- Williams Refrigeration: reach-in blast chillers and chiller freezers operating manual, WBC/WBCF10 to 50 (opens in a new tab)
- Williams Refrigeration: blast chillers and freezers brochure, 2017 (opens in a new tab)
- Williams Refrigeration Australia: WMBC90C roll-in blast chiller data sheet (opens in a new tab)
- Williams Refrigeration Australia: WMBCF90 roll-in blast chiller freezer data sheet (opens in a new tab)
- Williams Refrigeration Australia: operator and user manual, April 2020 (opens in a new tab)
- Zanussi Professional: Rapido 6 GN 1/1 blast chiller-freezer specification (opens in a new tab)
- Foodservice Equipment and Supplies: choosing a blast chiller (opens in a new tab)
- Danfoss: cold room setup by application (opens in a new tab)
- NSW Government: industrial refrigeration guide, 2017 (opens in a new tab)
- Bondor: BondorPanel technical data sheet, version 53, October 2025 (opens in a new tab)
- Virginia Cooperative Extension: factors that impact small-scale freeze dryer effectiveness, 2025 (opens in a new tab)
Related pages
- Coolroom or commercial fridges: choosing storage format and capacity
Where cooled food is held, and how much space it needs.
- Commercial refrigeration temperature records and template
A record sheet for storage temperatures.
- Choosing a refrigerated preparation counter
Tray sizes that move from oven to chiller to storage.
Choosing cooling equipment?
Send ABL your matrix with an enquiry, or call and talk it through.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
