Cooling-only or reverse-cycle air conditioning for a Gippsland home
Whether one reverse-cycle system should heat and cool your Gippsland home, when cooling only still fits, and a worksheet to set against your heating.
Last updated
For most Gippsland homes, reverse cycle is the better choice. Heating matters here for more of the year than cooling, and a reverse-cycle system does both. Cooling only still fits a few homes: those with heating they mean to keep, where the new unit only has to cool. Before you choose it, count what you give up: winter heating from the same unit, the Victorian Energy Upgrades discount, and in a rental, the heating standard.
How to use this guide
Step 2: Start from your heating
What you have now decides what the new unit has to do.
Go to Your heating now
What is the difference?
A cooling-only air conditioner moves heat one way: out of the room. A reverse-cycle one can run that process backwards, taking heat from the outside air and releasing it indoors, so the same unit heats in winter. The two look alike and are installed the same way: indoor unit, outdoor unit, pipes, power and a drain. One difference shows up outside. In heating, a reverse-cycle outdoor unit stops now and then to clear frost from its coil and sheds water as it does, so its spot needs to drain. The guides to outdoor frost and defrost and a slab or a wall bracket cover that.
Reverse cycle is by far the more common kind in Australian homes. Cooling-only split systems are still made, but some makers sell theirs only in northern Australia, where winters are mild, so the choice in Victoria is narrow.
Why heating decides it in Gippsland
Bairnsdale's long-term weather records (opens in a new tab) show the balance. On average about 23 days a year reach 30°C and about 8 reach 35°C, mostly from December to February. The average daily top stays under 20°C for five months, from May to September, and about 27 mornings a year fall to 2°C or colder. A cooling-only unit sits idle through the longer season.
Your own town may run hotter or colder than Bairnsdale. What decides your home is how many rooms you heat, for how many months, and with what.
When is each one the better choice?
| Your situation | The better choice |
|---|---|
| You want one system to heat and cool the same rooms | Reverse cycle. |
| You heat with portable or panel electric heaters | Reverse cycle. Those heaters give one unit of heat for each unit of electricity, and a reverse-cycle unit gives three to five. |
| You have ducted gas heating you mean to keep, and want cooling through the same ducts | Add-on cooling, which is cooling only, if the heater and the ducts suit it. |
| A good heater covers the room already, and you only want summer cooling there | Reverse cycle, unless a cooling-only quote is clearly cheaper. The installation is the same work, and it gives you a second way to heat. |
| The home is rented out, or may be | Reverse cycle. It can meet both the heating and the cooling standard. |
| You want the Victorian Energy Upgrades discount | Reverse cycle. Only approved reverse-cycle units qualify. |
Neither choice should mean pulling out heating that works without a site assessment. We settle that at the site, after looking at the rooms, the heating you have and how you use the house. The guide to single, multi-split or ducted layouts helps you decide which rooms need it.
What fits the heating you have now?
Start from the heating in the house now, because whatever is not replaced stays yours to run and look after.
| Heating you have now | Cooling only | Reverse cycle | What stays with you |
|---|---|---|---|
| Ducted gas heating | Add-on cooling through the same ducts, where the heater and ducts suit it, or a cooling-only split in the hottest room. | A split in the living area gives a second way to heat it. Replacing the gas system with ducted reverse cycle is a bigger job. | The gas heater, its servicing and its running costs. |
| A gas wall heater in the living area | Rarely worth it, because a split in the same room can heat as well. | One unit heats and cools the room. See the guide to replacing a gas wall heater with a split system. | If the heater stays, its servicing. |
| A wood heater | Fits if the fire gives all the heat you want. | Gives heat without lighting the fire, on mild mornings and at the ends of winter. | The fire, its wood and its upkeep. |
| Portable or panel electric heaters | Leaves expensive heating in place. | Takes over from them in the rooms it serves. | Little, once they go. |
| No heating, or heating you plan to remove | Leaves winter unsolved. | Heats and cools. | Nothing. |
| An evaporative cooler | It is already cooling only: see the guide to replacing evaporative cooling. | Refrigerated reverse cycle replaces the cooler and adds heating. | Whatever heating you have beside the cooler. |
Where a gas heater stays, keep it serviced. Energy Safe Victoria (opens in a new tab) recommends that all gas heaters are serviced at least every two years by a qualified gasfitter, including a test for carbon monoxide.
Add-on cooling is a refrigerated coil fitted to a ducted gas heater, with an outdoor unit, using the heater's ducts, outlets and controller. It suits only heaters made to take it, and the ducts have to be sized for cooling, so the heater's age, model and ducts decide it. The ducted heating and cooling page covers ducted reverse cycle.
How do you compare the two on the label?
The Zoned Energy Rating Label (opens in a new tab) rates cooling and heating separately, for a hot, an average and a cold climate zone. Find your zone with the Energy Rating Calculator, then compare the two options on the same lines:
- The same cooling capacity, in kW. Compare a cooling-only model and a reverse-cycle one of the same size, not two different sizes.
- The cooling stars for your zone. A model can rate differently in each zone.
- The heating side. On a cooling-only model it is left blank, with no heating stars. On a reverse-cycle model, read the heating capacity and the heating stars for your zone.
- The energy use. Multiply the label's yearly energy use by your electricity tariff for a running cost estimate.
A reverse-cycle model's label (opens in a new tab) gives two heating capacities, one at 7°C outside and one at 2°C. Compare the 2°C figure, and ask what the unit gives on a colder morning than that. The guides to heating capacity and cooling capacity on a quote, rated capacity and output in very cold weather and working out running costs from the label go further.
Rentals and discounts: what turns on heating
Rental homes. As at November 2026, Victoria's rental standards bring in an energy efficient electric heater (opens in a new tab) when the main heater fails from 1 March 2027, and an energy efficient fixed cooler (opens in a new tab) at a new agreement from 1 March 2027 and in all rentals from 1 July 2030, with exemptions: see the guide to rental heating and cooling standards in Victoria. A cooling-only unit cannot meet the heating standard, and Consumer Affairs Victoria's guide for rental providers (opens in a new tab) describes the cooler as a reverse-cycle unit, so for a rental, choose reverse cycle.
The Victorian Energy Upgrades discount. As at November 2026, the heating and cooling discount (opens in a new tab) is for an approved high-efficiency reverse-cycle air conditioner, installed through an accredited provider or an installer working with one. The guide to rebates in an air conditioning quote has the questions to ask.
Seasonal needs worksheet
Other questions about cooling only and reverse cycle
Can a cooling-only system be converted to reverse cycle?
Not by changing one half. The indoor and outdoor units are made as a matched pair, and a cooling-only indoor unit cannot run on a reverse-cycle outdoor unit. Adding heating means a reverse-cycle system.
My old cooling-only unit has failed. Should I replace it like for like?
Only if the room's heating is covered and staying. Otherwise a reverse-cycle unit in the same spot adds heating. The guide to repairing or replacing an air conditioner helps you weigh a repair first.
Are window units cooling only?
Many are, and some window and wall units are reverse cycle. See the guide to replacing a window air conditioner with a split system.
Who to call
We install reverse-cycle split and ducted systems for homes in Bairnsdale and East Gippsland. Our split system installation page explains how to ask for a quote. Send your worksheet with it, so the quote starts from the heating you have and the rooms you use.
Sources (16)
Checked on 20 November 2026
- Bureau of Meteorology: climate statistics for Bairnsdale Airport (opens in a new tab)
- Australian Government, Your Home: heating and cooling (opens in a new tab)
- AIRAH: residential air conditioning best practice guide (Victoria), second edition 2026 (opens in a new tab)
- Energy Rating: understand the Zoned Energy Rating Label (opens in a new tab)
- Greenhouse and Energy Minimum Standards (Air Conditioners up to 65kW) Determination 2019 (opens in a new tab)
- Mitsubishi Electric Australia: MSY-GW cooling only split systems (opens in a new tab)
- Rinnai Australia: CJ1 cooling only split system (opens in a new tab)
- Rinnai Australia: add-on cooling for ducted gas heating (opens in a new tab)
- Daikin Australia: can a cooling only indoor unit connect to a reverse cycle outdoor unit? (opens in a new tab)
- Consumer Affairs Victoria: minimum energy efficiency standards, heating standard, updated 5 June 2026 (opens in a new tab)
- Consumer Affairs Victoria: minimum energy efficiency standards, cooling standard, updated 5 June 2026 (opens in a new tab)
- Consumer Affairs Victoria: rental minimum energy efficiency standards, a guide for rental providers, September 2026 (opens in a new tab)
- Victorian Government: Victorian Energy Upgrades heating and cooling discounts, updated 29 October 2026 (opens in a new tab)
- Energy Safe Victoria: heating your home with gas, reviewed 10 July 2026 (opens in a new tab)
- Mitsubishi Electric Australia: operating instructions, MSZ-AP25 to 50VGKD2 (opens in a new tab)
- ABL Refrigeration: air conditioning services (opens in a new tab) ABL's own page.
Related pages
- Split system installation in Bairnsdale and East Gippsland
How to ask for a quote for a reverse-cycle split system.
- Can a split system replace a living-room gas heater?
If a gas wall heater is the heating you have now.
- Rated capacity versus output in very cold weather
How much heat a unit gives on a frosty morning.
Deciding between the two?
Send your worksheet with a quote request, so the quote starts from the heating you have now.
Filled in the record? Copy or print it first: it is not sent with a call or an enquiry.
